Peerless XXLS-835016
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 22.4 Hz |
| Qts | 0.315 |
| Qes | 0.33 |
| Qms | 7.1 |
| Vas | 94.4 L |
| Sd | 352 cm² |
| Xmax | 7.1 mm |
| Re | 2.6 Ω |
| Bl | 10.1 T·m |
| Mms | 92.9 g |
| Pe | 100 W |
| Sensitivity | 91.9 dB |
Alignment hint
| EBP | 68 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 23.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| SEAS L26ROY | 22 -0.4 | 0.306 -0.01 | 87 -7.4 | 7 -0.1 | 90.6 -1.3 | close | Xmax 7 mm < 7.1 mm: lower excursion-limited SPL | + |
| Scan-Speak 26W/4558T00 | 21 -1.4 | 0.312 = | 94.9 +0.5 | 6.3 -0.8 | 91.1 -0.8 | close | Xmax 6.3 mm < 7.1 mm: lower excursion-limited SPL | + |
| Peerless XXLS-830951 | 21 -1.4 | 0.308 -0.01 | 103 +8.6 | 10.1 +3 | 91.6 -0.3 | close | + | |
| Peerless NE265W-08 | 23 +0.6 | 0.301 -0.01 | 97.2 +2.8 | 9.4 +2.3 | 88.9 -3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Vifa NE-265W-08 | 23 +0.6 | 0.301 -0.01 | 97.2 +2.8 | 9.4 +2.3 | 88.9 -3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Peerless 830846 | 24.3 +1.9 | 0.328 +0.01 | 81.8 -12.6 | 8.7 +1.6 | 92.2 +0.3 | close | + | |
| Scan-Speak 28W/8878T01 | 22 -0.4 | 0.312 = | 116 +21.6 | 7.5 +0.4 | 88.7 -3.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Axon 10K01 | 25 +2.6 | 0.286 -0.03 | 104.6 +10.2 | 7 -0.1 | 92.9 +1 | close | Xmax 7 mm < 7.1 mm: lower excursion-limited SPL | + |
| HiVi S10IIP | 27 +4.6 | 0.287 -0.03 | 98.1 +3.7 | 7 -0.1 | 92.9 +1 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 7 mm < 7.1 mm: lower excursion-limited SPL | + |
| Vifa NE-265W-04 | 23 +0.6 | 0.294 -0.02 | 72.8 -21.6 | 8.9 +1.8 | 91.1 -0.8 | close | + |
Compare the closest 3 against the XXLS-835016 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.