Peerless FSL-1830R09-08
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 32.7 Hz |
| Qts | 0.587 |
| Qes | 0.61 |
| Qms | 15.46 |
| Vas | 283.1 L |
| Sd | 1225.4 cm² |
| Xmax | 9.6 mm |
| Re | 7.14 Ω |
| Bl | 20.6 T·m |
| Mms | 176.1 g |
| Pe | 600 W |
| Sensitivity | 94.6 dB |
Alignment hint
| EBP | 54 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 627.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KILOMAX PRO 18 | 33 +0.3 | 0.557 -0.03 | 239.9 -43.2 | 10 +0.4 | 95.1 +0.5 | close | + | |
| Eminence KILOMAX PRO 18 A | 33 +0.3 | 0.557 -0.03 | 239.9 -43.2 | 10 +0.4 | 95.1 +0.5 | close | + | |
| Radian 2218 | 33.8 +1.1 | 0.525 -0.06 | 286 +2.9 | 9 -0.6 | 95.5 +0.9 | close | Xmax 9 mm < 9.6 mm: lower excursion-limited SPL | + |
| Eminence KILOMAX 18 | 33.8 +1.1 | 0.527 -0.06 | 281.4 -1.7 | 10 +0.4 | 96.4 +1.8 | close | + | |
| Radian 2218-8 | 33.8 +1.1 | 0.518 -0.07 | 282.9 -0.2 | 9 -0.6 | 95.5 +0.9 | close | Xmax 9 mm < 9.6 mm: lower excursion-limited SPL | + |
| Dayton Audio PA465S-8 | 32.3 -0.4 | 0.569 -0.02 | 193 -90.1 | 9.9 +0.3 | 93.9 -0.7 | close | + | |
| SB Audience BIANCO-18SW500 | 30 -2.7 | 0.516 -0.07 | 335 +51.9 | 9.2 -0.4 | 95.8 +1.2 | usable | Xmax 9.2 mm < 9.6 mm: lower excursion-limited SPL | + |
| Eminence KILOMAX PRO-18A | 32 -0.7 | 0.47 -0.12 | 331.5 +48.4 | 10 +0.4 | 95.8 +1.2 | usable | + | |
| Resonant Engineering XXX-18 | 29 -3.7 | 0.569 -0.02 | 244.2 -38.9 | 16 +6.4 | 97.9 +3.3 | usable | 2 Ω vs 8 Ω: amp load changes | + |
| SB Audience 18SW800 | 33 +0.3 | 0.456 -0.13 | 258.1 -25 | 9.3 -0.3 | 96.8 +2.2 | usable | Xmax 9.3 mm < 9.6 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the FSL-1830R09-08 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.