Peerless FSL-1015R02-08
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 68.4 Hz |
| Qts | 0.616 |
| Qes | 0.72 |
| Qms | 4.25 |
| Vas | 37.7 L |
| Sd | 369.8 cm² |
| Xmax | 2.2 mm |
| Re | 5.47 Ω |
| Bl | 9.5 T·m |
| Mms | 27.5 g |
| Pe | 75 W |
| Sensitivity | 95.9 dB |
Alignment hint
| EBP | 95 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 118.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion BL 10-100 | 70 +1.6 | 0.608 -0.01 | 33 -4.7 | 3.3 +1.1 | 95.7 -0.2 | close | + | |
| Fenton NS10X | 67.5 -0.9 | 0.563 -0.05 | 40.2 +2.5 | 3.8 +1.6 | 95.6 -0.3 | close | + | |
| RCF L10CX1AK | 67.9 -0.5 | 0.59 -0.03 | 33 -4.7 | 3 +0.8 | 93.6 -2.3 | close | + | |
| Celestion K10-70 | 80 +11.6 | 0.672 +0.06 | 31 -6.7 | 2.2 = | 95.9 = | usable | + | |
| Fenton PS10F vp | 60.1 -8.3 | 0.586 -0.03 | 41.2 +3.5 | 4 +1.8 | 93.3 -2.6 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Hyper Phase CM10 | 65 -3.4 | 0.511 -0.1 | 45 +7.3 | 3.3 +1.1 | 95.6 -0.3 | usable | + | |
| Wharfedale D-002 | 71.3 +2.9 | 0.624 +0.01 | 50.8 +13.1 | 4 +1.8 | 98.2 +2.3 | usable | + | |
| LaVoce FBASS10-18-16 | 70 +1.6 | 0.57 -0.05 | 28.39 -9.31 | 4.8 +2.6 | 95 -0.9 | usable | 16 Ω vs 8 Ω: amp load changes | + |
| Beyma CM-10 | 61 -7.4 | 0.506 -0.11 | 40.7 +3 | 3.6 +1.4 | 95.4 -0.5 | usable | + | |
| Fenton PS10 vp | 57.6 -10.8 | 0.657 +0.04 | 37.9 +0.2 | 3.8 +1.6 | 92.1 -3.8 | usable | + |
Compare the closest 3 against the FSL-1015R02-08 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.