← all drivers

Peavey S-10825

10" · 8 Ω · 200 W · 96.7 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs102 Hz
Qts0.671
Qes0.742
Qms7
Vas14.6 L
Sd310 cm²
Xmax2.7 mm
Re5.58 Ω
Bl10.4 T·m
Mms22.5 g
Pe200 W
Sensitivity96.7 dB

Alignment hint

EBP137 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 132.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
JB Systems PWX10-20085 -170.74 +0.0716 +1.42.4 -0.393.3 -3.4usableXmax 2.4 mm < 2.7 mm: lower excursion-limited SPL+
Monacor SP-10A/250NEO80 -220.635 -0.0419 +4.43 +0.395.1 -1.6usable+
Audax PR240T090 -120.629 -0.0420.6 +61.8 -0.998.6 +1.9usable4 Ω vs 8 Ω: amp load changes · 80 W vs 200 W: lower power handling · Xmax 1.8 mm < 2.7 mm: lower excursion-limited SPL+
Celestion BL10-10085.9 -16.10.587 -0.0825.8 +11.22.5 -0.297.3 +0.6usable100 W vs 200 W: lower power handling · Xmax 2.5 mm < 2.7 mm: lower excursion-limited SPL+
Jensen P10/100BB112.1 +10.10.804 +0.1314.1 -0.51 -1.796.9 +0.2usable100 W vs 200 W: lower power handling · Xmax 1 mm < 2.7 mm: lower excursion-limited SPL+
B&C 10 CLX 6470 -320.627 -0.0421 +6.42.3 -0.493.8 -2.9usable70 W vs 200 W: lower power handling · Xmax 2.3 mm < 2.7 mm: lower excursion-limited SPL+
Celestion K10-7080 -220.672 =31 +16.42.2 -0.595.9 -0.8usable70 W vs 200 W: lower power handling · Xmax 2.2 mm < 2.7 mm: lower excursion-limited SPL+
Celestion TF 101879.8 -22.20.527 -0.1423.8 +9.22 -0.796.3 -0.4risky150 W vs 200 W: lower power handling · Xmax 2 mm < 2.7 mm: lower excursion-limited SPL+
Precision Devices PD102 ER81.8 -20.20.523 -0.1526 +11.45 +2.398 +1.3risky16 Ω vs 8 Ω: amp load changes · 100 W vs 200 W: lower power handling+
B&C 10 CLA 6474 -280.422 -0.2518.5 +3.93 +0.395.2 -1.5risky+

Compare the closest 3 against the S-10825 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.