← all drivers

Peavey PRO-15

15" · 8 Ω · 200 W · 97.7 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance8 Ω
Fs34.4 Hz
Qts0.425
Qes0.482
Qms3.576
Vas331.6 L
Sd855 cm²
Xmax2.5 mm
Re6 Ω
Bl13.3 T·m
Mms66.2 g
Pe200 W
Sensitivity97.7 dB

Alignment hint

EBP71 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 187.5 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Peavey PRO-15 NEO34.4 =0.425 =331.6 =2.5 =97.7 =close+
Peavey PRO 15 LOW FREQUENCY34.4 =0.423 =331.6 =2.5 =97.7 =close+
Beyma 15SP32 -2.40.412 -0.01309 -22.64.3 +1.896.9 -0.8close150 W vs 200 W: lower power handling+
Monacor SP-38/300NEO36 +1.60.43 +0.01265 -66.63.5 +197.8 +0.1close+
Beyma 15XM36 +1.60.398 -0.03310 -21.64 +1.598.9 +1.2close+
MCM Electronics 55-323432.5 -1.90.458 +0.03322.2 -9.46 +3.598.9 +1.2close4 Ω vs 8 Ω: amp load changes+
Hyper Phase CM15T35 +0.60.508 +0.08308 -23.63.5 +197 -0.7close150 W vs 200 W: lower power handling+
MCM Electronics 55-321332.5 -1.90.473 +0.05322.2 -9.46 +3.598.7 +1close4 Ω vs 8 Ω: amp load changes+
Beyma CM-15G34 -0.40.375 -0.05285 -46.65 +2.597.7 =close+
Klipsch K33-E34.5 +0.10.388 -0.04301.7 -29.94.1 +1.6100.5 +2.8close4 Ω vs 8 Ω: amp load changes · 100 W vs 200 W: lower power handling+

Compare the closest 3 against the PRO-15 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.