Peavey PRO 10
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 67.7 Hz |
| Qts | 0.395 |
| Qes | 0.456 |
| Qms | 2.85 |
| Vas | 25.1 L |
| Sd | 350 cm² |
| Xmax | 2.5 mm |
| Re | 5.97 Ω |
| Bl | 14.33 T·m |
| Mms | 36.9 g |
| Pe | 200 W |
| Sensitivity | 94.2 dB |
Alignment hint
| EBP | 148 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 11.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion PULSE 10 | 68 +0.3 | 0.439 +0.04 | 25.8 +0.7 | 3.4 +0.9 | 95.1 +0.9 | close | + | |
| RCF L10/568H | 70.1 +2.4 | 0.4 +0.01 | 28.8 +3.7 | 3 +0.5 | 95.6 +1.4 | close | 100 W vs 200 W: lower power handling | + |
| B&C 10 FCX 64 | 63 -4.7 | 0.417 +0.02 | 25 -0.1 | 4.4 +1.9 | 95.1 +0.9 | close | + | |
| LaVoce WAF102.52 | 66 -1.7 | 0.412 +0.02 | 23.5 -1.6 | 4.5 +2 | 96 +1.8 | close | + | |
| BMS 10C262 | 65 -2.7 | 0.368 -0.03 | 25.5 +0.4 | 5.1 +2.6 | 95.7 +1.5 | close | + | |
| Celestion FTX1025 | 71.5 +3.8 | 0.44 +0.04 | 25.9 +0.8 | 3 +0.5 | 96.2 +2 | close | + | |
| Monacor SP-25A/200NEO | 69 +1.3 | 0.349 -0.05 | 25 -0.1 | 3.1 +0.6 | 97.2 +3 | close | + | |
| Celestion BN10-300X8 | 64.3 -3.4 | 0.382 -0.01 | 28.8 +3.7 | 4 +1.5 | 95.8 +1.6 | close | + | |
| Monacor SP-10/100PA | 65 -2.7 | 0.381 -0.01 | 32 +6.9 | 2.5 = | 95.8 +1.6 | close | 100 W vs 200 W: lower power handling | + |
| Celestion BN10-300X(4) | 64.2 -3.5 | 0.43 +0.03 | 29.2 +4.1 | 4 +1.5 | 93.8 -0.4 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling | + |
Compare the closest 3 against the PRO 10 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.