Peavey LO MAX 18
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33.5 Hz |
| Qts | 0.318 |
| Qes | 0.33 |
| Qms | 8.741 |
| Vas | 249.7 L |
| Sd | 1237 cm² |
| Xmax | 9.5 mm |
| Re | 6.1 Ω |
| Bl | 27.5 T·m |
| Mms | 193.9 g |
| Pe | 1200 W |
| Sensitivity | 97.7 dB |
Alignment hint
| EBP | 102 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 63.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 18LW2400 | 33 -0.5 | 0.32 = | 235 -14.7 | 9.5 = | 98 +0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 18LW2400 | 35 +1.5 | 0.31 -0.01 | 230 -19.7 | 9.5 = | 98 +0.3 | close | + | |
| Fane COLOSSUS 18-1000 | 32 -1.5 | 0.319 = | 236 -13.7 | 8.9 -0.6 | 97 -0.7 | close | Xmax 8.9 mm < 9.5 mm: lower excursion-limited SPL | + |
| Faital PRO 18HP1010 | 35 +1.5 | 0.31 -0.01 | 225.9 -23.8 | 9.75 +0.25 | 98 +0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Ciare NDH18_4S | 31 -2.5 | 0.319 = | 239 -10.7 | 9.4 -0.1 | 96.5 -1.2 | close | Xmax 9.4 mm < 9.5 mm: lower excursion-limited SPL | + |
| Dayton Audio APOLLO 18N | 32 -1.5 | 0.338 +0.02 | 253.6 +3.9 | 9.1 -0.4 | 96.9 -0.8 | close | Xmax 9.1 mm < 9.5 mm: lower excursion-limited SPL | + |
| Beyma 18P1000FE | 33 -0.5 | 0.32 = | 230 -19.7 | 8 -1.5 | 97.8 +0.1 | close | Xmax 8 mm < 9.5 mm: lower excursion-limited SPL | + |
| Beyma 18" P1000Fe V2/S | 33 -0.5 | 0.32 = | 230 -19.7 | 8 -1.5 | 98 +0.3 | close | Xmax 8 mm < 9.5 mm: lower excursion-limited SPL | + |
| Peavey LO MAX 18 v2011 | 33.5 = | 0.321 = | 294.4 +44.7 | 10.2 +0.7 | 98.9 +1.2 | close | + | |
| 18 Sound 18LW2420 | 34 +0.5 | 0.31 -0.01 | 208 -41.7 | 10 +0.5 | 98 +0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the LO MAX 18 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.