Peavey 1808-8 SPS BWX
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 37.4 Hz |
| Qts | 0.587 |
| Qes | 0.637 |
| Qms | 7.55 |
| Vas | 368 L |
| Sd | 1240 cm² |
| Xmax | 4.6 mm |
| Re | 6.71 Ω |
| Bl | 16.26 T·m |
| Mms | 106.7 g |
| Pe | 500 W |
| Sensitivity | 96.6 dB |
Alignment hint
| EBP | 59 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 815.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| DAS Audio P-18 | 36 -1.4 | 0.583 = | 314 -54 | 4.5 -0.1 | 96.3 -0.3 | close | 350 W vs 500 W: lower power handling · Xmax 4.5 mm < 4.6 mm: lower excursion-limited SPL | + |
| Peavey 1801-8 v1993 | 40.2 +2.8 | 0.586 = | 321 -47 | 5 +0.4 | 98.1 +1.5 | close | 350 W vs 500 W: lower power handling | + |
| Fane 18-500 | 33 -4.4 | 0.563 -0.02 | 346 -22 | 6.3 +1.7 | 96.9 +0.3 | close | + | |
| Fane SOVEREIGN 18-500 | 33 -4.4 | 0.563 -0.02 | 346 -22 | 6.3 +1.7 | 96.9 +0.3 | close | + | |
| Peavey PRO RIDER 18 1808-8 AL CP | 36 -1.4 | 0.55 -0.04 | 296.475 -71.52 | 4.6 = | 95.6 -1 | close | + | |
| Peavey 1801-8 LT BW | 40.2 +2.8 | 0.61 +0.02 | 284.9 -83.1 | 5 +0.4 | 96.5 -0.1 | close | 350 W vs 500 W: lower power handling | + |
| Beyma SM118/N | 36 -1.4 | 0.492 -0.09 | 300 -68 | 5.5 +0.9 | 97.2 +0.6 | usable | + | |
| Peavey 1801-8 BWX | 40.4 +3 | 0.525 -0.06 | 284.9 -83.1 | 5 +0.4 | 98.2 +1.6 | usable | 350 W vs 500 W: lower power handling | + |
| Peavey 1801-8 | 40.4 +3 | 0.523 -0.06 | 284.9 -83.1 | 5 +0.4 | 98.2 +1.6 | usable | 350 W vs 500 W: lower power handling | + |
| Peerless FSL-1830R09-08 | 32.7 -4.7 | 0.587 = | 283.1 -84.9 | 9.6 +5 | 94.6 -2 | usable | + |
Compare the closest 3 against the 1808-8 SPS BWX →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.