Peavey 1801-4 v1993
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 40.6 Hz |
| Qts | 0.464 |
| Qes | 0.49 |
| Qms | 8.9 |
| Vas | 330 L |
| Sd | 1200 cm² |
| Xmax | 5 mm |
| Re | 3.5 Ω |
| Bl | 13.1 T·m |
| Mms | 94 g |
| Pe | 350 W |
| Sensitivity | 102.1 dB |
Alignment hint
| EBP | 83 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 249.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Peavey 1801-4 | 37.3 -3.3 | 0.448 -0.02 | 335.6 +5.6 | 5 = | 101 -1.1 | close | + | |
| JBL 2042H | 39 -1.6 | 0.404 -0.06 | 337 +7 | 7.1 +2.1 | 101.3 -0.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Peavey 1801-8 | 40.4 -0.2 | 0.523 +0.06 | 284.9 -45.1 | 5 = | 98.2 -3.9 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| JBL 2241G | 35 -5.6 | 0.4 -0.06 | 310 -20 | 7.5 +2.5 | 101.9 -0.2 | usable | + | |
| Peavey 1801-8 BWX | 40.4 -0.2 | 0.525 +0.06 | 284.9 -45.1 | 5 = | 98.2 -3.9 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Peavey 1801-8 v1993 | 40.2 -0.4 | 0.586 +0.12 | 321 -9 | 5 = | 98.1 -4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma SM118/N | 36 -4.6 | 0.492 +0.03 | 300 -30 | 5.5 +0.5 | 97.2 -4.9 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Selenium 18SWS1100 | 34 -6.6 | 0.447 -0.02 | 316 -14 | 9.3 +4.3 | 97.8 -4.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence KILOMAX PRO 18 A v2016 | 32 -8.6 | 0.467 = | 331.5 +1.5 | 10 +5 | 97.4 -4.7 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Selenium WPU1805 | 34 -6.6 | 0.447 -0.02 | 316 -14 | 4.3 -0.7 | 97.1 -5 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 4.3 mm < 5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 1801-4 v1993 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.