PD PDN 10MH25
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 79.7 Hz |
| Qts | 0.221 |
| Qes | 0.229 |
| Qms | 6.22 |
| Vas | 18 L |
| Sd | 346.4 cm² |
| Xmax | 2.4 mm |
| Re | 5.87 Ω |
| Bl | 21.8 T·m |
| Mms | 37.2 g |
| Pe | 300 W |
| Sensitivity | 99.3 dB |
Alignment hint
| EBP | 348 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PDN 10MH25 | 79.7 = | 0.221 = | 18 = | 2.4 = | 99.3 = | close | + | |
| 18 Sound 10NDA610 | 89 +9.3 | 0.23 +0.01 | 18 = | 2.5 +0.1 | 103 +3.7 | close | + | |
| Beyma 10MI100 | 89 +9.3 | 0.251 +0.03 | 20 +2 | 2.5 +0.1 | 100.4 +1.1 | close | + | |
| B&C 10 NW 76 4 Ohms | 67 -12.7 | 0.194 -0.03 | 17.8 -0.2 | 3 +0.6 | 100.5 +1.2 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| LaVoce WAN103.01 | 70 -9.7 | 0.22 = | 22.29 +4.29 | 5 +2.6 | 99 -0.3 | usable | + | |
| Oberton 10NM300 | 71.36 -8.34 | 0.209 -0.01 | 20.61 +2.61 | 5.25 +2.85 | 100 +0.7 | usable | + | |
| PHL Audio 3860NdM | 90 +10.3 | 0.231 +0.01 | 16.3 -1.7 | 1.8 -0.6 | 100.4 +1.1 | usable | Xmax 1.8 mm < 2.4 mm: lower excursion-limited SPL | + |
| B&C 10 MD 26 | 76 -3.7 | 0.21 -0.01 | 20 +2 | 1.5 -0.9 | 99.4 +0.1 | usable | Xmax 1.5 mm < 2.4 mm: lower excursion-limited SPL | + |
| P.Audio P10/100MB | 73 -6.7 | 0.234 +0.01 | 26.7 +8.7 | 2.5 +0.1 | 99.1 -0.2 | usable | 200 W vs 300 W: lower power handling | + |
| RCF 10 CX251 | 72 -7.7 | 0.237 +0.02 | 25 +7 | 3 +0.6 | 99.6 +0.3 | usable | + |
Compare the closest 3 against the PDN 10MH25 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.