Precision Devices PD123 ER
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 16 Ω |
| Fs | 60.5 Hz |
| Qts | 0.247 |
| Qes | 0.257 |
| Qms | 6.62 |
| Vas | 51 L |
| Sd | 530 cm² |
| Xmax | 6.5 mm |
| Re | 5.6 Ω |
| Bl | 21.49 T·m |
| Mms | 54 g |
| Pe | 400 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 235 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 7.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sica 12 K 4 PL | 48.5 -12 | 0.25 = | 47.4 -3.6 | 7 +0.5 | 97.1 +0.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 12W750 | 55 -5.5 | 0.27 +0.02 | 58 +7 | 7 +0.5 | 97 = | close | 4 Ω vs 16 Ω: amp load changes | + |
| Oberton 12MB35 | 51.43 -9.07 | 0.267 +0.02 | 50.07 -0.93 | 6.75 +0.25 | 98 +1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| 18 Sound 12ND830 | 58 -2.5 | 0.24 -0.01 | 63 +12 | 6.5 = | 99 +2 | close | 4 Ω vs 16 Ω: amp load changes | + |
| B&C 12NDL88 | 51 -9.5 | 0.27 +0.02 | 52 +1 | 8 +1.5 | 98 +1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 12NDL88 | 48 -12.5 | 0.24 -0.01 | 57 +6 | 8 +1.5 | 97 = | close | 4 Ω vs 16 Ω: amp load changes | + |
| Beyma 12MC700Nd | 51 -9.5 | 0.24 -0.01 | 58 +7 | 7 +0.5 | 99 +2 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 12 P1000/Nd | 47 -13.5 | 0.26 +0.01 | 49 -2 | 8 +1.5 | 96 -1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| B&C 12 NDL 88 | 51 -9.5 | 0.274 +0.03 | 52 +1 | 5.7 -0.8 | 97.8 +0.8 | usable | 8 Ω vs 16 Ω: amp load changes · Xmax 5.7 mm < 6.5 mm: lower excursion-limited SPL | + |
| B&C 12CLA76 | 52 -8.5 | 0.25 = | 56 +5 | 5.3 -1.2 | 98.5 +1.5 | usable | 8 Ω vs 16 Ω: amp load changes · Xmax 5.3 mm < 6.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the PD123 ER →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.