PD PD 1851/2
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 37 Hz |
| Qts | 0.286 |
| Qes | 0.29 |
| Qms | 18.49 |
| Vas | 160.5 L |
| Sd | 1164.2 cm² |
| Xmax | 6.7 mm |
| Re | 5.23 Ω |
| Bl | 30.3 T·m |
| Mms | 218.7 g |
| Pe | 1000 W |
| Sensitivity | 98.3 dB |
Alignment hint
| EBP | 128 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 31.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PD 1851/2 | 37 = | 0.286 = | 160.5 = | 6.7 = | 98.3 = | close | + | |
| Oberton 18XB1300 | 35.2 -1.8 | 0.287 = | 170.9 +10.4 | 8 +1.3 | 97.8 -0.5 | close | + | |
| B&C 18PZB100 | 38 +1 | 0.28 -0.01 | 164 +3.5 | 8 +1.3 | 96.5 -1.8 | close | 4 Ω vs 8 Ω: amp load changes · 700 W vs 1000 W: lower power handling | + |
| Oberton 18NXB700 | 36.24 -0.76 | 0.312 +0.03 | 155.46 -5.04 | 9 +2.3 | 98 -0.3 | close | + | |
| Oberton 18XB1301 | 35.7 -1.3 | 0.302 +0.02 | 172.9 +12.4 | 8.2 +1.5 | 97.9 -0.4 | close | + | |
| Oberton 18XB1201 | 38.05 +1.05 | 0.317 +0.03 | 159.37 -1.13 | 10.5 +3.8 | 98.5 +0.2 | close | + | |
| Oberton 18NXB1601 | 34.6 -2.4 | 0.286 = | 146.2 -14.3 | 8.2 +1.5 | 96.9 -1.4 | close | + | |
| 18 Sound 18NLW9600 | 34 -3 | 0.281 = | 149 -11.5 | 9 +2.3 | 97.3 -1 | close | + | |
| Oberton 18XB700 | 36.1 -0.9 | 0.304 +0.02 | 183.22 +22.72 | 9 +2.3 | 98 -0.3 | close | + | |
| SICA 18 F 4 CP | 38 +1 | 0.29 = | 185.2 +24.7 | 6.2 -0.5 | 97 -1.3 | close | 700 W vs 1000 W: lower power handling · Xmax 6.2 mm < 6.7 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the PD 1851/2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.