PD PD 156 v2014
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 50.3 Hz |
| Qts | 0.469 |
| Qes | 0.5 |
| Qms | 7.45 |
| Vas | 93.4 L |
| Sd | 908 cm² |
| Xmax | 5.7 mm |
| Re | 5.69 Ω |
| Bl | 21.1 T·m |
| Mms | 124.1 g |
| Pe | 650 W |
| Sensitivity | 97.2 dB |
Alignment hint
| EBP | 101 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 73.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PD 156 v2014 | 50.3 = | 0.469 = | 93.4 = | 5.7 = | 97.2 = | close | + | |
| Beyma 15CM V2 | 49 -1.3 | 0.49 +0.02 | 104 +10.6 | 7 +1.3 | 97 -0.2 | close | 350 W vs 650 W: lower power handling | + |
| P.Audio E15-LF | 50 -0.3 | 0.42 -0.05 | 92.17 -1.23 | 6 +0.3 | 95.9 -1.3 | close | + | |
| B&C 15FW88 | 49 -1.3 | 0.43 -0.04 | 103.7 +10.3 | 8 +2.3 | 98 +0.8 | close | + | |
| Beyma 15CMV2 v2021 | 49 -1.3 | 0.485 +0.02 | 104 +10.6 | 4.5 -1.2 | 96.7 -0.5 | close | 350 W vs 650 W: lower power handling · Xmax 4.5 mm < 5.7 mm: lower excursion-limited SPL | + |
| Eminence KAPPALITE 3015 LF-4 | 47 -3.3 | 0.468 = | 118.6 +25.2 | 5.7 = | 99.2 +2 | close | 4 Ω vs 8 Ω: amp load changes · 450 W vs 650 W: lower power handling | + |
| RCF L 15P540 | 50 -0.3 | 0.393 -0.08 | 100 +6.6 | 5.2 -0.5 | 98.4 +1.2 | close | 500 W vs 650 W: lower power handling · Xmax 5.2 mm < 5.7 mm: lower excursion-limited SPL | + |
| RCF LF 15G302 vp baptiste | 56.8 +6.5 | 0.561 +0.09 | 87 -6.4 | 6 +0.3 | 97.1 -0.1 | close | + | |
| Beyma 15MCS500-8 | 46 -4.3 | 0.47 = | 133.5 +40.1 | 6.5 +0.8 | 97.5 +0.3 | close | 500 W vs 650 W: lower power handling | + |
| Beyma 15LX60V2 | 42 -8.3 | 0.441 -0.03 | 105.5 +12.1 | 6.9 +1.2 | 96.3 -0.9 | usable | + |
Compare the closest 3 against the PD 156 v2014 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.