PD PD 153ER
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 39 Hz |
| Qts | 0.219 |
| Qes | 0.23 |
| Qms | 4.45 |
| Vas | 160 L |
| Sd | 830 cm² |
| Xmax | 4.8 mm |
| Re | 5.7 Ω |
| Bl | 24.7 T·m |
| Mms | 100.5 g |
| Pe | 400 W |
| Sensitivity | 99.6 dB |
Alignment hint
| EBP | 170 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 17 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PD 153ER | 39 = | 0.219 = | 160 = | 4.8 = | 99.6 = | close | + | |
| Precision Devices PD153 ER | 39 = | 0.222 = | 160 = | 6.5 +1.7 | 99 -0.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Oberton 15XL601 | 40.9 +1.9 | 0.216 = | 150.32 -9.68 | 5.25 +0.45 | 100 +0.4 | close | + | |
| Oberton 15LX600 | 40.9 +1.9 | 0.216 = | 150.3 -9.7 | 5.3 +0.5 | 100.4 +0.8 | close | + | |
| PD PD 154 | 39 = | 0.206 -0.01 | 149 -11 | 4.6 -0.2 | 99.2 -0.4 | close | Xmax 4.6 mm < 4.8 mm: lower excursion-limited SPL | + |
| Precision Devices PD 154 | 39 = | 0.206 -0.01 | 149 -11 | 4.6 -0.2 | 99.2 -0.4 | close | Xmax 4.6 mm < 4.8 mm: lower excursion-limited SPL | + |
| PD PD 158 | 39.9 +0.9 | 0.241 +0.02 | 161.9 +1.9 | 5.9 +1.1 | 99.4 -0.2 | close | + | |
| Precision Devices PD 158 | 39.9 +0.9 | 0.241 +0.02 | 161.9 +1.9 | 5.9 +1.1 | 99.4 -0.2 | close | + | |
| Precision Devices PD158 | 39.85 +0.85 | 0.205 -0.01 | 161.94 +1.94 | 6.5 +1.7 | 98.5 -1.1 | close | + | |
| Precision Devices PD154 | 39 = | 0.205 -0.01 | 149 -11 | 6.5 +1.7 | 99 -0.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the PD 153ER →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.