PD PD 124NR1
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 58 Hz |
| Qts | 0.354 |
| Qes | 0.37 |
| Qms | 8.2 |
| Vas | 49 L |
| Sd | 540 cm² |
| Xmax | 7.4 mm |
| Re | 6.1 Ω |
| Bl | 19.4 T·m |
| Mms | 62.8 g |
| Pe | 1100 W |
| Sensitivity | 97.3 dB |
Alignment hint
| EBP | 157 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PD 124NR1 | 58 = | 0.354 = | 49 = | 7.4 = | 97.3 = | close | + | |
| Beyma 12MCS500 | 57 -1 | 0.36 +0.01 | 57 +8 | 8 +0.6 | 98 +0.7 | close | 500 W vs 1100 W: lower power handling | + |
| 18 Sound 12NW350 | 54 -4 | 0.34 -0.01 | 46 -3 | 8.3 +0.9 | 98 +0.7 | close | 800 W vs 1100 W: lower power handling | + |
| 18 Sound 12W700 | 58 = | 0.36 +0.01 | 55 +6 | 6.5 -0.9 | 98 +0.7 | close | 450 W vs 1100 W: lower power handling · Xmax 6.5 mm < 7.4 mm: lower excursion-limited SPL | + |
| Beyma 12"MC500 | 57 -1 | 0.34 -0.01 | 57 +8 | 8 +0.6 | 98 +0.7 | close | 500 W vs 1100 W: lower power handling | + |
| 18 Sound 12NTLW2500 | 60 +2 | 0.38 +0.03 | 45 -4 | 7.6 +0.2 | 98.5 +1.2 | close | 500 W vs 1100 W: lower power handling | + |
| B&C 12FW88 | 53 -5 | 0.33 -0.02 | 45.7 -3.3 | 8 +0.6 | 97 -0.3 | close | 700 W vs 1100 W: lower power handling | + |
| 18 Sound 12NTLW3500 | 53 -5 | 0.33 -0.02 | 45 -4 | 8.3 +0.9 | 97 -0.3 | close | + | |
| SB Audience NERO-12MWN700D vp JustDiyIt | 54.4 -3.6 | 0.347 -0.01 | 53.6 +4.6 | 6.2 -1.2 | 97.5 +0.2 | close | 700 W vs 1100 W: lower power handling · Xmax 6.2 mm < 7.4 mm: lower excursion-limited SPL | + |
| B&C 12PLB100 | 50 -8 | 0.37 +0.02 | 47 -2 | 9 +1.6 | 97 -0.3 | close | 600 W vs 1100 W: lower power handling | + |
Compare the closest 3 against the PD 124NR1 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.