Precision Devices PD.123C01
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 46 Hz |
| Qts | 0.32 |
| Qes | 0.32 |
| Qms | 16.2 |
| Vas | 66.82 L |
| Sd | 526 cm² |
| Xmax | 7 mm |
| Re | 5.9 Ω |
| Bl | 19.2 T·m |
| Mms | 68.6 g |
| Pe | 400 W |
| Sensitivity | 94.9 dB |
Alignment hint
| EBP | 144 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 17.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Precision Devices PD.12SB30 | 47 +1 | 0.31 -0.01 | 66.82 = | 7 = | 95.2 +0.3 | close | + | |
| Precision Devices PD 123C01 | 46 = | 0.314 -0.01 | 66.8 -0.02 | 5.6 -1.4 | 96.4 +1.5 | close | Xmax 5.6 mm < 7 mm: lower excursion-limited SPL | + |
| Eminence IMPERO 12 A | 42.8 -3.2 | 0.322 = | 70.2 +3.38 | 6.2 -0.8 | 95.8 +0.9 | close | Xmax 6.2 mm < 7 mm: lower excursion-limited SPL | + |
| Beyma 12LX60 | 42 -4 | 0.3 -0.02 | 66 -0.82 | 9 +2 | 93.8 -1.1 | close | + | |
| 18 Sound 12NTLS3500 | 41 -5 | 0.34 +0.02 | 63 -3.82 | 7.9 +0.9 | 94.5 -0.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| LaVoce NBASS12-30-16 | 48 +2 | 0.34 +0.02 | 69.83 +3.01 | 7.3 +0.3 | 97.5 +2.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Eminence DEFINIMAX 4012 HO | 46 = | 0.356 +0.04 | 59.4 -7.42 | 6.2 -0.8 | 95.2 +0.3 | close | Xmax 6.2 mm < 7 mm: lower excursion-limited SPL | + |
| Eminence LA12850 | 46 = | 0.312 -0.01 | 66.1 -0.72 | 5 -2 | 96.4 +1.5 | close | Xmax 5 mm < 7 mm: lower excursion-limited SPL | + |
| Faital PRO 12FH500 16 Ohms | 48 +2 | 0.367 +0.05 | 66.6 -0.22 | 7.3 +0.3 | 92.8 -2.1 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Sica 12 S 3 PL | 42 -4 | 0.34 +0.02 | 76.9 +10.08 | 7 = | 95.8 +0.9 | close | + |
Compare the closest 3 against the PD.123C01 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.