P.Audio S15-100LF
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38 Hz |
| Qts | 0.35 |
| Qes | 0.37 |
| Qms | 6.55 |
| Vas | 169.1 L |
| Sd | 855 cm² |
| Xmax | 7.8 mm |
| Re | 5 Ω |
| Bl | 18.5 T·m |
| Mms | 106.3 g |
| Pe | 600 W |
| Sensitivity | 98 dB |
Alignment hint
| EBP | 103 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 54.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| PD PD 15BR40 | 38.7 +0.7 | 0.34 -0.01 | 158.3 -10.8 | 7.9 +0.1 | 98.1 +0.1 | close | + | |
| Precision Devices PD 15BR40 | 38.7 +0.7 | 0.34 -0.01 | 158.3 -10.8 | 7.9 +0.1 | 98.1 +0.1 | close | + | |
| Oberton 15CX | 38.2 +0.2 | 0.349 = | 163.8 -5.3 | 6.8 -1 | 97.8 -0.2 | close | 450 W vs 600 W: lower power handling · Xmax 6.8 mm < 7.8 mm: lower excursion-limited SPL | + |
| JBL 2265 HPL | 37 -1 | 0.325 -0.02 | 176 +6.9 | 8 +0.2 | 97.9 -0.1 | close | + | |
| Fane COLOSSUS 15XB v2012 | 38 = | 0.322 -0.03 | 168 -1.1 | 7.5 -0.3 | 97.3 -0.7 | close | Xmax 7.5 mm < 7.8 mm: lower excursion-limited SPL | + |
| Elokance 15WF2400 | 38 = | 0.32 -0.03 | 165.2 -3.9 | 10.5 +2.7 | 98.1 +0.1 | close | + | |
| 18 Sound 15ND940 | 41 +3 | 0.36 +0.01 | 166 -3.1 | 9.5 +1.7 | 98.5 +0.5 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 15FH520 | 38 = | 0.34 -0.01 | 153.2 -15.9 | 9.15 +1.35 | 97 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Celestion TF1530E | 41 +3 | 0.344 -0.01 | 181.7 +12.6 | 8 +0.2 | 97.1 -0.9 | close | 400 W vs 600 W: lower power handling | + |
| Beyma 15MC700 | 41 +3 | 0.352 = | 153 -16.1 | 7.4 -0.4 | 97.7 -0.3 | close | Xmax 7.4 mm < 7.8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the S15-100LF →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.