P.Audio P150/2226
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 41 Hz |
| Qts | 0.366 |
| Qes | 0.39 |
| Qms | 5.9 |
| Vas | 154.8 L |
| Sd | 880 cm² |
| Xmax | 5.5 mm |
| Re | 5.1 Ω |
| Bl | 18.9 T·m |
| Mms | 105.7 g |
| Pe | 1000 W |
| Sensitivity | 98.3 dB |
Alignment hint
| EBP | 105 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 56.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| BMS 15N620 | 41 = | 0.35 -0.02 | 154 -0.8 | 5.5 = | 98 -0.3 | close | 500 W vs 1000 W: lower power handling | + |
| BMS 15N620 v2015 | 41 = | 0.348 -0.02 | 154 -0.8 | 5.5 = | 98 -0.3 | close | 500 W vs 1000 W: lower power handling | + |
| Eminence KAPPA 15 LFA vp1 | 40.9 -0.1 | 0.382 +0.02 | 159.1 +4.3 | 5.5 = | 97.8 -0.5 | close | 600 W vs 1000 W: lower power handling | + |
| Eminence KILOMAX PRO 15 | 41 = | 0.383 +0.02 | 154.5 -0.3 | 7.9 +2.4 | 98.3 = | close | + | |
| Eminence KILOMAX PRO 15 A | 41 = | 0.383 +0.02 | 154.5 -0.3 | 7.9 +2.4 | 98.3 = | close | + | |
| Eminence KILOMAX 15 | 41 = | 0.383 +0.02 | 154 -0.8 | 7.9 +2.4 | 98.3 = | close | + | |
| Eminence KAPPA 15 LFA vp2 | 40.8 -0.2 | 0.392 +0.03 | 153.2 -1.6 | 5.5 = | 97.7 -0.6 | close | 600 W vs 1000 W: lower power handling | + |
| Beyma 15MC700 | 41 = | 0.352 -0.01 | 153 -1.8 | 7.4 +1.9 | 97.7 -0.6 | close | 700 W vs 1000 W: lower power handling | + |
| Eminence KAPPALITE 3015 LF | 42 +1 | 0.387 +0.02 | 158.8 +4 | 6.4 +0.9 | 98.3 = | close | 450 W vs 1000 W: lower power handling | + |
| LaVoce NBASS15-30 | 42 +1 | 0.36 -0.01 | 143.06 -11.74 | 6.6 +1.1 | 98.5 +0.2 | close | 400 W vs 1000 W: lower power handling | + |
Compare the closest 3 against the P150/2226 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.