P.Audio HP-10W
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 48.43 Hz |
| Qts | 0.4 |
| Qes | 0.44 |
| Qms | 5.9 |
| Vas | 55.35 L |
| Sd | 340 cm² |
| Xmax | 3 mm |
| Re | 6.5 Ω |
| Bl | 12.08 T·m |
| Mms | 32.01 g |
| Pe | 200 W |
| Sensitivity | 93.4 dB |
Alignment hint
| EBP | 110 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 26 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence LEGEND B102 | 48 -0.43 | 0.389 -0.01 | 65 +9.65 | 3 = | 95 +1.6 | close | + | |
| Eminence BETA 10CX | 49 +0.57 | 0.38 -0.02 | 61.1 +5.75 | 5 +2 | 94.3 +0.9 | close | + | |
| Faital PRO 10FE300 | 50 +1.57 | 0.39 -0.01 | 49 -6.35 | 5.47 +2.47 | 94 +0.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Davis 25SCA10W clio | 40.2 -8.23 | 0.39 -0.01 | 55.3 -0.05 | 3.5 +0.5 | 92.1 -1.3 | close | 60 W vs 200 W: lower power handling | + |
| Eminence BETA 10CX-8 | 48 -0.43 | 0.397 = | 64.2 +8.85 | 5 +2 | 95.8 +2.4 | close | + | |
| Beyma 10CX300/FE | 48 -0.43 | 0.38 -0.02 | 62.7 +7.35 | 6.75 +3.75 | 94.1 +0.7 | close | + | |
| Eminence BETA 10CX | 49 +0.57 | 0.397 = | 64.2 +8.85 | 5 +2 | 96 +2.6 | close | + | |
| Dayton Audio MB1025-8 | 45 -3.43 | 0.35 -0.05 | 50.7 -4.65 | 3 = | 94.7 +1.3 | close | + | |
| Eminence DELTALITE II 2510 | 53 +4.57 | 0.417 +0.02 | 52.5 -2.85 | 4.2 +1.2 | 96.4 +3 | close | + | |
| Faital PRO 10PR320 | 50 +1.57 | 0.38 -0.02 | 50.6 -4.75 | 7.27 +4.27 | 95 +1.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the HP-10W →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.