P.Audio HP-10T

10" · 8 Ω · 200 W · 90.4 dB

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	70 Hz
Qts	0.72
Qes	1.03
Qms	2.39
Vas	21.46 L
Sd	340 cm²
Xmax	1 mm
Re	6.84 Ω
Bl	10.81 T·m
Mms	40 g
Pe	200 W
Sensitivity	90.4 dB

Alignment hint

EBP	68 · flexible
Sealed Vb (Qtc ≈ 0.71)	Qts too high

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
RCF L 10P15K	83 +13	0.718 =	19 -2.46	1 =	94.1 +3.7	usable		+
B&C 10 CLX 64	70 =	0.627 -0.09	21 -0.46	2.3 +1.3	93.8 +3.4	usable	70 W vs 200 W: lower power handling	+
Tannoy DC200	66.5 -3.5	0.607 -0.11	25.8 +4.34	1.6 +0.6	92 +1.6	usable	40 W vs 200 W: lower power handling	+
Selenium 10PW3	73 +3	0.654 -0.07	29 +7.54	1.3 +0.3	94.9 +4.5	usable	150 W vs 200 W: lower power handling	+
Hartke VLF1008	68 -2	0.965 +0.25	26.2 +4.74	2.1 +1.1	91.4 +1	usable	75 W vs 200 W: lower power handling	+
JB Systems PWX10-200	85 +15	0.74 +0.02	16 -5.46	2.4 +1.4	93.3 +2.9	usable		+
Monacor SP-10A/250NEO	80 +10	0.635 -0.08	19 -2.46	3 +2	95.1 +4.7	usable		+
Monacor SP-252PA	55 -15	0.681 -0.04	30 +8.54	2.4 +1.4	89.1 -1.3	usable	75 W vs 200 W: lower power handling	+
Ciare PW255	78 +8	0.862 +0.14	26 +4.54	2.9 +1.9	93.8 +3.4	usable	150 W vs 200 W: lower power handling	+
Celestion TF 1015	85 +15	1.049 +0.33	21 -0.46	1.4 +0.4	92.9 +2.5	usable	70 W vs 200 W: lower power handling	+

Compare the closest 3 against the HP-10T →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.