P.Audio BM15CX38
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 36 Hz |
| Qts | 0.221 |
| Qes | 0.23 |
| Qms | 5.53 |
| Vas | 287 L |
| Sd | 830 cm² |
| Xmax | 4.5 mm |
| Re | 7 Ω |
| Bl | 21.3 T·m |
| Mms | 65.8 g |
| Pe | 500 W |
| Sensitivity | 100.2 dB |
Alignment hint
| EBP | 157 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 31.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 15GT200 v1990 | 34 -2 | 0.236 +0.01 | 276 -11 | 5 +0.5 | 99.4 -0.8 | close | 250 W vs 500 W: lower power handling | + |
| Fane SOVEREIGN PRO 15-600N | 33 -3 | 0.222 = | 310 +23 | 6.5 +2 | 100.5 +0.3 | close | + | |
| JBL E145 | 35 -1 | 0.249 +0.03 | 274.7 -12.3 | 4.1 -0.4 | 100 -0.2 | close | 150 W vs 500 W: lower power handling · Xmax 4.1 mm < 4.5 mm: lower excursion-limited SPL | + |
| Altec 921-8A | 34.1 -1.9 | 0.257 +0.04 | 299 +12 | 5.2 +0.7 | 100.1 -0.1 | close | 200 W vs 500 W: lower power handling | + |
| Benett 15.200 X/N | 34.3 -1.7 | 0.211 -0.01 | 338 +51 | 5 +0.5 | 101.2 +1 | close | 200 W vs 500 W: lower power handling | + |
| Beyma 15GT200 v2 | 31 -5 | 0.218 = | 270 -17 | 5.4 +0.9 | 98.8 -1.4 | close | 250 W vs 500 W: lower power handling | + |
| Beyma 15GT200 v1 | 30.4 -5.6 | 0.223 = | 270 -17 | 5.5 +1 | 98.4 -1.8 | close | 250 W vs 500 W: lower power handling | + |
| Electro-Voice EVX-155 | 35.4 -0.6 | 0.212 -0.01 | 220 -67 | 6.4 +1.9 | 100.5 +0.3 | close | + | |
| PD 153ERC002 | 38 +2 | 0.249 +0.03 | 263 -24 | 6.8 +2.3 | 100.9 +0.7 | close | + | |
| Precision Devices 153ERC002 | 38 +2 | 0.249 +0.03 | 263 -24 | 6.8 +2.3 | 100.9 +0.7 | close | + |
Compare the closest 3 against the BM15CX38 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.