P.Audio 12BM-300B
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 48 Hz |
| Qts | 0.31 |
| Qes | 0.33 |
| Qms | 4.4 |
| Vas | 81.27 L |
| Sd | 550 cm² |
| Xmax | 3.3 mm |
| Re | 5.5 Ω |
| Bl | 17.1 T·m |
| Mms | 58.1 g |
| Pe | 300 W |
| Sensitivity | 96.2 dB |
Alignment hint
| EBP | 145 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 19.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Ciare PW328 | 48 = | 0.32 +0.01 | 91 +9.73 | 3 -0.3 | 96.3 +0.1 | close | 150 W vs 300 W: lower power handling · Xmax 3 mm < 3.3 mm: lower excursion-limited SPL | + |
| Audax PR33ST150 | 46 -2 | 0.327 +0.02 | 90 +8.73 | 3.5 +0.2 | 97.2 +1 | close | 150 W vs 300 W: lower power handling | + |
| Jensen BP12/250 | 50.2 +2.2 | 0.319 +0.01 | 73.5 -7.77 | 3.1 -0.2 | 97.4 +1.2 | close | Xmax 3.1 mm < 3.3 mm: lower excursion-limited SPL | + |
| SICA BP12/150 | 50.2 +2.2 | 0.319 +0.01 | 73.5 -7.77 | 3.1 -0.2 | 97.5 +1.3 | close | 150 W vs 300 W: lower power handling · Xmax 3.1 mm < 3.3 mm: lower excursion-limited SPL | + |
| B&C 12 FCX 76 | 47 -1 | 0.339 +0.03 | 82 +0.73 | 5 +1.7 | 97.6 +1.4 | close | + | |
| Sica 12 L1 2.5 SL | 47.5 -0.5 | 0.36 +0.05 | 81.8 +0.53 | 3.7 +0.4 | 97.3 +1.1 | close | + | |
| Beyma 12G350 | 50 +2 | 0.293 -0.02 | 80 -1.27 | 3.1 -0.2 | 98.5 +2.3 | close | 125 W vs 300 W: lower power handling · Xmax 3.1 mm < 3.3 mm: lower excursion-limited SPL | + |
| Beyma 12"G40 | 44 -4 | 0.3 -0.01 | 81 -0.27 | 7 +3.7 | 97 +0.8 | close | + | |
| Beyma 12G40 | 44 -4 | 0.292 -0.02 | 81 -0.27 | 6 +2.7 | 96.8 +0.6 | close | + | |
| SICA 12 E 2 CS | 48 = | 0.364 +0.05 | 76.9 -4.37 | 4 +0.7 | 95.9 -0.3 | close | 200 W vs 300 W: lower power handling | + |
Compare the closest 3 against the 12BM-300B →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.