Oxygen ALIUM 253
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 34 Hz |
| Qts | 0.64 |
| Qes | 0.7 |
| Qms | 7.44 |
| Vas | 73.4 L |
| Sd | 380 cm² |
| Xmax | 5.7 mm |
| Re | 3.6 Ω |
| Bl | 8.1 T·m |
| Mms | 60.5 g |
| Pe | 85 W |
| Sensitivity | 91.6 dB |
Alignment hint
| EBP | 49 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 332.6 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Pioneer TS-W254R | 33.5 -0.5 | 0.619 -0.02 | 68 -5.4 | 10.7 +5 | 92.2 +0.6 | close | + | |
| Peerless SLS10 P830668 v2009 | 33 -1 | 0.591 -0.05 | 75.7 +2.3 | 5.8 +0.1 | 89.7 -1.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| GRS 10SW-4 | 34 = | 0.634 -0.01 | 57.5 -15.9 | 6.3 +0.6 | 89.5 -2.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Skytronic 902.214 | 34.3 +0.3 | 0.595 -0.05 | 70.2 -3.2 | 6.1 +0.4 | 87.7 -3.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Peerless SLS10 P830668 v2012 | 32 -2 | 0.545 -0.09 | 72.9 -0.5 | 5.7 = | 89.6 -2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Peerless SLS10 830668 | 33.3 -0.7 | 0.51 -0.13 | 69.3 -4.1 | 5.4 -0.3 | 90.1 -1.5 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 5.4 mm < 5.7 mm: lower excursion-limited SPL | + |
| Peerless SLS W 10-30/08 | 33 -1 | 0.51 -0.13 | 69.3 -4.1 | 6.5 +0.8 | 89.9 -1.7 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Sica 10 SR 2 CP | 32.8 -1.2 | 0.49 -0.15 | 73 -0.4 | 7 +1.3 | 89.8 -1.8 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Sound Storm Labs SS10 | 32.3 -1.7 | 0.505 -0.13 | 72.1 -1.3 | 11.2 +5.5 | 92.6 +1 | usable | + | |
| JL Audio 10IB4 | 37.5 +3.5 | 0.771 +0.13 | 82.9 +9.5 | 7 +1.3 | 89.6 -2 | usable | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the ALIUM 253 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.