Oxygen AIR2 250
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 36.4 Hz |
| Qts | 0.502 |
| Qes | 0.54 |
| Qms | 7.15 |
| Vas | 22.4 L |
| Sd | 326 cm² |
| Xmax | 5.8 mm |
| Re | 3.7 Ω |
| Bl | 14.1 T·m |
| Mms | 127.2 g |
| Pe | 250 W |
| Sensitivity | 88.3 dB |
Alignment hint
| EBP | 67 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 22.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| hertz Hertz Audio ML2500 | 33 -3.4 | 0.497 -0.01 | 19 -3.4 | 8 +2.2 | 88 -0.3 | close | + | |
| Sony XS-L104P5B | 37.7 +1.3 | 0.569 +0.07 | 19.3 -3.1 | 6 +0.2 | 87.8 -0.5 | close | + | |
| hertz Hertz Audio HX250 | 37 +0.6 | 0.444 -0.06 | 24 +1.6 | 5.3 -0.5 | 90.3 +2 | close | Xmax 5.3 mm < 5.8 mm: lower excursion-limited SPL | + |
| Wavecor SW263TU01 | 29.5 -6.9 | 0.5 = | 24.5 +2.1 | 6.4 +0.6 | 86.8 -1.5 | close | + | |
| Polk Audio MM100 | 35 -1.4 | 0.46 -0.04 | 22.1 -0.3 | 8.7 +2.9 | 84.7 -3.6 | close | + | |
| Focal SUB25KXE | 38 +1.6 | 0.52 +0.02 | 20 -2.4 | 8.2 +2.4 | 91.7 +3.4 | close | 2 Ω vs 4 Ω: amp load changes | + |
| American Bass DX 10 | 36.1 -0.3 | 0.486 -0.02 | 20.7 -1.7 | 12 +6.2 | 84.4 -3.9 | close | + | |
| Focal ACCESS 27A | 41.3 +4.9 | 0.48 -0.02 | 21.2 -1.2 | 5 -0.8 | 90.8 +2.5 | usable | Xmax 5 mm < 5.8 mm: lower excursion-limited SPL | + |
| Focal 11V 5552 | 40.5 +4.1 | 0.497 -0.01 | 24.1 +1.7 | 4.6 -1.2 | 90.8 +2.5 | usable | 175 W vs 250 W: lower power handling · Xmax 4.6 mm < 5.8 mm: lower excursion-limited SPL | + |
| Kicker COMPVX 10 | 35.4 -1 | 0.403 -0.1 | 23 +0.6 | 5.2 -0.6 | 89.6 +1.3 | usable | Xmax 5.2 mm < 5.8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the AIR2 250 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.