Oberton ND100-2
Compression driver specs
| Throat exit | 2" |
|---|---|
| Voice coil | 100 mm |
| Impedance | 8 Ω |
| Usable range | 800-20000 Hz |
| Min crossover | 800 Hz |
| Sensitivity (on horn) | 112.5 dB |
| Power (AES) | 125 W |
Compatible horns (same exit)
- B&C ME60 · 60°×40°
- Beyma TD-460/N · 60°×40°
- BMS 2230 · 90°×55°
- BMS 2236 · 60°×40°
Matched on throat exit (2") only. Verify mounting and crossover against both datasheets.
Substitute candidates
| Driver | Min XO (Hz) | Range low (Hz) | Range high (Hz) | Voice coil (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound ND4020Ti2 | 800 = | 600 -200 | 20000 = | 100 = | 113 +0.5 | close | + | |
| Oberton D572CN | 800 = | 800 = | 20000 = | 72 -28 | 111 -1.5 | close | + | |
| Oberton D572CT | 800 = | 800 = | 20000 = | 72 -28 | 111 -1.5 | close | + | |
| Eminence N320T-8 | 800 = | 800 = | 20000 = | 76.2 -23.8 | 110.4 -2.1 | close | + | |
| Oberton D5073 | 800 = | 800 = | 20000 = | 72 -28 | 110.5 -2 | close | 80 W vs 125 W: lower power handling | + |
| Oberton D571CN | 800 = | 800 = | 20000 = | 72 -28 | 110 -2.5 | close | + | |
| Beyma CP/850/ND 8 OH. | 500 -300 | 500 -300 | 20000 = | 100 = | 112 -0.5 | usable | + | |
| Beyma CP/800/TI 8 OH. | 500 -300 | 500 -300 | 20000 = | 101.6 +1.6 | 112 -0.5 | usable | + | |
| 18 Sound ND2080A | 800 = | 500 -300 | 20000 = | 75 -25 | 112 -0.5 | usable | 16 Ω vs 8 Ω: amp load changes · 80 W vs 125 W: lower power handling | + |
| Beyma CP/750/TI | 800 = | 600 -200 | 20000 = | 72.4 -27.6 | 110 -2.5 | usable | 70 W vs 125 W: lower power handling | + |
Compare the closest 3 against the ND100-2 →
Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.