← all drivers

Oberton ND100-1.4

1.4" exit · 8 Ω · 125 W · 112 dB · datasheet ↗

Compression driver specs

Throat exit1.4"
Voice coil100 mm
Impedance8 Ω
Usable range800-20000 Hz
Min crossover800 Hz
Sensitivity (on horn)112 dB
Power (AES)125 W

Compatible horns (same exit)

Matched on throat exit (1.4") only. Verify mounting and crossover against both datasheets.

Substitute candidates

DriverMin XO (Hz)Range low (Hz)Range high (Hz)Voice coil (mm)Sens (dB)FitNotesCompare
Eminence N314T-8 1.4" Throat Size HF Device - Neodymium800 =800 =20000 =76.2 -23.8110.9 -1.1close+
Eminence N314T-16 1.4" Throat Size HF Device - Neodymium800 =800 =20000 =76.2 -23.8110.6 -1.4close16 Ω vs 8 Ω: amp load changes+
Oberton D3673800 =800 =20000 =72 -28110.5 -1.5close80 W vs 125 W: lower power handling+
Oberton ND3672800 =800 =20000 =72 -28110 -2close75 W vs 125 W: lower power handling+
Oberton D3671800 =800 =20000 =72 -28109 -3usable75 W vs 125 W: lower power handling+
Radian 951600 -200500 -30020000 =101.6 +1.6111.5 -0.5usable16 Ω vs 8 Ω: amp load changes+
Radian 951600 -200500 -30020000 =101.6 +1.6111.5 -0.5usable+
Beyma CD-314Nd /Ti800 =600 -20020000 =76.2 -23.8110 -2usable+
Beyma CP/755/ND800 =600 -20020000 =72.4 -27.6110 -2usable60 W vs 125 W: lower power handling+
Beyma CP/755/TI800 =600 -20020000 =72.4 -27.6110 -2usable70 W vs 125 W: lower power handling+

Compare the closest 3 against the ND100-1.4 →

Ranked on parameter similarity only (crossover floor, range, sensitivity, voice coil). Same throat exit required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.