Oberton 18XB1300
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35.2 Hz |
| Qts | 0.287 |
| Qes | 0.296 |
| Qms | 9.56 |
| Vas | 170.9 L |
| Sd | 1158 cm² |
| Xmax | 8 mm |
| Re | 5.2 Ω |
| Bl | 29.6 T·m |
| Mms | 225.3 g |
| Pe | 1300 W |
| Sensitivity | 97.8 dB |
Alignment hint
| EBP | 119 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 33.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 18XB1301 | 35.7 +0.5 | 0.302 +0.02 | 172.9 +2 | 8.2 +0.2 | 97.9 +0.1 | close | + | |
| Oberton 18XB1301DS | 35.7 +0.5 | 0.302 +0.02 | 172.9 +2 | 12 +4 | 97.5 -0.3 | close | + | |
| Oberton 18XB700 | 36.1 +0.9 | 0.304 +0.02 | 183.22 +12.32 | 9 +1 | 98 +0.2 | close | 1000 W vs 1300 W: lower power handling | + |
| Oberton 18NXB1601 | 34.6 -0.6 | 0.286 = | 146.2 -24.7 | 8.2 +0.2 | 96.9 -0.9 | close | + | |
| B&C 18PZB100 | 38 +2.8 | 0.28 -0.01 | 164 -6.9 | 8 = | 96.5 -1.3 | close | 4 Ω vs 8 Ω: amp load changes · 700 W vs 1300 W: lower power handling | + |
| 18 Sound 18NLW9600 | 34 -1.2 | 0.281 -0.01 | 149 -21.9 | 9 +1 | 97.3 -0.5 | close | + | |
| Faital PRO 18HP1030 | 35 -0.2 | 0.32 +0.03 | 172.2 +1.3 | 12.45 +4.45 | 98 +0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 18DS100 | 34 -1.2 | 0.29 = | 155 -15.9 | 14.5 +6.5 | 97.5 -0.3 | close | + | |
| Oberton 18NXB700 | 36.24 +1.04 | 0.312 +0.03 | 155.46 -15.44 | 9 +1 | 98 +0.2 | close | 1000 W vs 1300 W: lower power handling | + |
| PD PD 1851/2 | 37 +1.8 | 0.286 = | 160.5 -10.4 | 6.7 -1.3 | 98.3 +0.5 | close | 1000 W vs 1300 W: lower power handling · Xmax 6.7 mm < 8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18XB1300 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.