Oberton 18NXB1600
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 32.37 Hz |
| Qts | 0.303 |
| Qes | 0.332 |
| Qms | 5.11 |
| Vas | 173.11 L |
| Sd | 1158 cm² |
| Xmax | 13.5 mm |
| Re | 5.3 Ω |
| Bl | 29.58 T·m |
| Mms | 261.56 g |
| Pe | 1600 W |
| Sensitivity | 97 dB |
Alignment hint
| EBP | 97 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 38.9 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 18SW115 | 32 -0.37 | 0.3 = | 187 +13.89 | 14 +0.5 | 97 = | close | + | |
| 18 Sound 18LW2600 | 31 -1.37 | 0.29 -0.01 | 187 +13.89 | 14.8 +1.3 | 96.8 -0.2 | close | + | |
| 18 Sound 18NTLW5000 | 32 -0.37 | 0.3 = | 165 -8.11 | 17.5 +4 | 95 -2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Oberton 18XB1301DS | 35.7 +3.33 | 0.302 = | 172.9 -0.21 | 12 -1.5 | 97.5 +0.5 | close | Xmax 12 mm < 13.5 mm: lower excursion-limited SPL | + |
| 18 Sound 18NLW9000 | 34 +1.63 | 0.31 +0.01 | 206 +32.89 | 14 +0.5 | 97 = | close | + | |
| 18 Sound 18NTLW5000 | 32 -0.37 | 0.32 +0.02 | 176 +2.89 | 17.5 +4 | 95 -2 | close | + | |
| B&C 18DS100 | 34 +1.63 | 0.29 -0.01 | 155 -18.11 | 14.5 +1 | 97.5 +0.5 | close | + | |
| Faital PRO 18XL1600 | 32 -0.37 | 0.31 +0.01 | 201.1 +27.99 | 12.92 -0.58 | 98 +1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 12.92 mm < 13.5 mm: lower excursion-limited SPL | + |
| B&C 18SW115 | 34 +1.63 | 0.3 = | 149.1 -24.01 | 14 +0.5 | 96 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 18TBW100 | 33 +0.63 | 0.32 +0.02 | 181.5 +8.39 | 12 -1.5 | 96 -1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 12 mm < 13.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 18NXB1600 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.