Oberton 15NB500
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 42.77 Hz |
| Qts | 0.255 |
| Qes | 0.26 |
| Qms | 11.97 |
| Vas | 121.46 L |
| Sd | 829.6 cm² |
| Xmax | 7.25 mm |
| Re | 5.23 Ω |
| Bl | 24.31 T·m |
| Mms | 109.57 g |
| Pe | 500 W |
| Sensitivity | 99 dB |
Alignment hint
| EBP | 165 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 18.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 15LW1410 | 42 -0.77 | 0.27 +0.02 | 131 +9.54 | 8.5 +1.25 | 98.5 -0.5 | close | + | |
| 18 Sound 15LW1401 4 Ohms | 39 -3.77 | 0.26 +0.01 | 127 +5.54 | 7.4 +0.15 | 100 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| 18 Sound 15LW1402 | 42 -0.77 | 0.28 +0.03 | 126 +4.54 | 7 -0.25 | 98.4 -0.6 | close | Xmax 7 mm < 7.25 mm: lower excursion-limited SPL | + |
| B&C 15CL76 | 42 -0.77 | 0.25 -0.01 | 140 +18.54 | 7 -0.25 | 98 -1 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7 mm < 7.25 mm: lower excursion-limited SPL | + |
| 18 Sound 15LW1400 | 42 -0.77 | 0.245 -0.01 | 137 +15.54 | 6.7 -0.55 | 99.3 +0.3 | close | Xmax 6.7 mm < 7.25 mm: lower excursion-limited SPL | + |
| 18 Sound 15LW1401 | 42 -0.77 | 0.27 +0.02 | 131 +9.54 | 9 +1.75 | 98 -1 | close | + | |
| 18 Sound 15LW1401 | 39 -3.77 | 0.26 +0.01 | 127 +5.54 | 9 +1.75 | 98 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| P.Audio P-15N | 39.8 -2.97 | 0.254 = | 144.6 +23.14 | 7.5 +0.25 | 99.2 +0.2 | close | + | |
| RCF MB 15N405 | 46 +3.23 | 0.265 +0.01 | 124 +2.54 | 6.6 -0.65 | 100 +1 | close | Xmax 6.6 mm < 7.25 mm: lower excursion-limited SPL | + |
| Faital PRO 15HP1020 | 40 -2.77 | 0.27 +0.02 | 126.6 +5.14 | 9 +1.75 | 98 -1 | close | + |
Compare the closest 3 against the 15NB500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.