Oberton 15LX600
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 40.9 Hz |
| Qts | 0.216 |
| Qes | 0.22 |
| Qms | 10.9 |
| Vas | 150.3 L |
| Sd | 829.6 cm² |
| Xmax | 5.3 mm |
| Re | 5.4 Ω |
| Bl | 24.8 T·m |
| Mms | 97.2 g |
| Pe | 600 W |
| Sensitivity | 100.4 dB |
Alignment hint
| EBP | 186 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 15.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 15XL601 | 40.9 = | 0.216 = | 150.32 +0.02 | 5.25 -0.05 | 100 -0.4 | close | Xmax 5.25 mm < 5.3 mm: lower excursion-limited SPL | + |
| PHL Audio 6051 | 39 -1.9 | 0.209 -0.01 | 135.6 -14.7 | 5.3 = | 100.5 +0.1 | close | + | |
| B&C 15FW76 | 40 -0.9 | 0.21 -0.01 | 138 -12.3 | 7 +1.7 | 100 -0.4 | close | + | |
| Beyma 15P80/FE | 41 +0.1 | 0.236 +0.02 | 159.3 +9 | 6.6 +1.3 | 100.6 +0.2 | close | + | |
| B&C 15 FW 76 | 40 -0.9 | 0.211 -0.01 | 138 -12.3 | 4.7 -0.6 | 100.1 -0.3 | close | Xmax 4.7 mm < 5.3 mm: lower excursion-limited SPL | + |
| PD PD 153ER | 39 -1.9 | 0.219 = | 160 +9.7 | 4.8 -0.5 | 99.6 -0.8 | close | 400 W vs 600 W: lower power handling · Xmax 4.8 mm < 5.3 mm: lower excursion-limited SPL | + |
| Precision Devices PD 153ER | 39 -1.9 | 0.219 = | 160 +9.7 | 4.8 -0.5 | 99.6 -0.8 | close | 400 W vs 600 W: lower power handling · Xmax 4.8 mm < 5.3 mm: lower excursion-limited SPL | + |
| Precision Devices PD154 | 39 -1.9 | 0.205 -0.01 | 149 -1.3 | 6.5 +1.2 | 99 -1.4 | close | 16 Ω vs 8 Ω: amp load changes | + |
| PHL Audio 6050 | 40 -0.9 | 0.209 -0.01 | 130 -20.3 | 5.1 -0.2 | 100.7 +0.3 | close | Xmax 5.1 mm < 5.3 mm: lower excursion-limited SPL | + |
| B&C 15 NW 76 | 42 +1.1 | 0.218 = | 130 -20.3 | 4.9 -0.4 | 100 -0.4 | close | Xmax 4.9 mm < 5.3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15LX600 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.