Oberton 15L400
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 43.25 Hz |
| Qts | 0.287 |
| Qes | 0.294 |
| Qms | 11.56 |
| Vas | 229.9 L |
| Sd | 829.6 cm² |
| Xmax | 3.25 mm |
| Re | 5.45 Ω |
| Bl | 16.87 T·m |
| Mms | 56.6 g |
| Pe | 400 W |
| Sensitivity | 102.5 dB |
Alignment hint
| EBP | 147 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 45.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Electro-Voice EVM-15BII | 43 -0.25 | 0.293 +0.01 | 225 -4.9 | 3.3 +0.05 | 101.6 -0.9 | close | + | |
| P.Audio SN-15B | 42.9 -0.35 | 0.296 +0.01 | 234.7 +4.8 | 3.3 +0.05 | 101.5 -1 | close | 200 W vs 400 W: lower power handling | + |
| Electro-Voice EVM-15B | 43 -0.25 | 0.297 +0.01 | 225 -4.9 | 3.3 +0.05 | 101.5 -1 | close | + | |
| Altec ER-15B | 43 -0.25 | 0.303 +0.02 | 226.5 -3.4 | 3.3 +0.05 | 101.5 -1 | close | 200 W vs 400 W: lower power handling | + |
| Beyma 15M300 | 45 +1.75 | 0.271 -0.02 | 220 -9.9 | 3.5 +0.25 | 101.6 -0.9 | close | 300 W vs 400 W: lower power handling | + |
| 18 Sound 15MB700 | 42 -1.25 | 0.29 = | 202 -27.9 | 5.5 +2.25 | 103 +0.5 | close | + | |
| B&C 15 PE 40 | 44 +0.75 | 0.27 -0.02 | 205 -24.9 | 3 -0.25 | 101.5 -1 | close | 250 W vs 400 W: lower power handling · Xmax 3 mm < 3.25 mm: lower excursion-limited SPL | + |
| P.Audio E15-300S v2015 | 39 -4.25 | 0.287 = | 228.8 -1.1 | 4.3 +1.05 | 99.5 -3 | close | 300 W vs 400 W: lower power handling | + |
| P.Audio E 300S | 39 -4.25 | 0.287 = | 228 -1.9 | 4.3 +1.05 | 99.5 -3 | close | 300 W vs 400 W: lower power handling | + |
| Altec ER-15L | 43 -0.25 | 0.238 -0.05 | 246.4 +16.5 | 3.3 +0.05 | 102.8 +0.3 | close | 200 W vs 400 W: lower power handling | + |
Compare the closest 3 against the 15L400 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.