Oberton 15B500
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 38.2 Hz |
| Qts | 0.268 |
| Qes | 0.274 |
| Qms | 12.06 |
| Vas | 145.82 L |
| Sd | 829.6 cm² |
| Xmax | 7.25 mm |
| Re | 5.23 Ω |
| Bl | 22.91 T·m |
| Mms | 114.4 g |
| Pe | 500 W |
| Sensitivity | 99 dB |
Alignment hint
| EBP | 139 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 24.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 15NB451 | 39.57 +1.37 | 0.257 -0.01 | 145.21 -0.61 | 7 -0.25 | 99 = | close | Xmax 7 mm < 7.25 mm: lower excursion-limited SPL | + |
| P.Audio P-15N | 39.8 +1.6 | 0.254 -0.01 | 144.6 -1.22 | 7.5 +0.25 | 99.2 +0.2 | close | + | |
| BMS 15N830V2 v2015 | 37 -1.2 | 0.271 = | 159 +13.18 | 7.5 +0.25 | 98.6 -0.4 | close | + | |
| B&C 15PS76-8 | 38 -0.2 | 0.26 -0.01 | 164 +18.18 | 7.5 +0.25 | 99 = | close | + | |
| 18 Sound 15NLW9300 v2015 | 39 +0.8 | 0.263 -0.01 | 170 +24.18 | 7.2 -0.05 | 98.9 -0.1 | close | Xmax 7.2 mm < 7.25 mm: lower excursion-limited SPL | + |
| B&C 15NDL88 | 41 +2.8 | 0.28 +0.01 | 154 +8.18 | 8 +0.75 | 99 = | close | 4 Ω vs 8 Ω: amp load changes | + |
| PHL Audio 6030 | 38 -0.2 | 0.264 = | 130 -15.82 | 7.2 -0.05 | 97.6 -1.4 | close | Xmax 7.2 mm < 7.25 mm: lower excursion-limited SPL | + |
| RCF LF 15G401 | 36 -2.2 | 0.259 -0.01 | 150 +4.18 | 6.9 -0.35 | 98.3 -0.7 | close | Xmax 6.9 mm < 7.25 mm: lower excursion-limited SPL | + |
| RCF L 15P400 | 36 -2.2 | 0.261 -0.01 | 160 +14.18 | 7.2 -0.05 | 98.6 -0.4 | close | Xmax 7.2 mm < 7.25 mm: lower excursion-limited SPL | + |
| Faital PRO 15FX560 v2015 | 38 -0.2 | 0.296 +0.03 | 143 -2.82 | 7.5 +0.25 | 97.9 -1.1 | close | + |
Compare the closest 3 against the 15B500 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.