Oberton 15B450 / 15B450A / 15B450A2
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 45.08 Hz |
| Qts | 0.286 |
| Qes | 0.294 |
| Qms | 9.6 |
| Vas | 146.85 L |
| Sd | 829.6 cm² |
| Xmax | 6.75 mm |
| Re | 5.32 Ω |
| Bl | 20.43 T·m |
| Mms | 81.56 g |
| Pe | 450 W |
| Sensitivity | 100 dB |
Alignment hint
| EBP | 153 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 28.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| 18 Sound 15NTLW2500 | 45 -0.08 | 0.3 +0.01 | 143 -3.85 | 8 +1.25 | 100.5 +0.5 | close | + | |
| Oberton 15B450 | 45.1 +0.02 | 0.285 = | 146.9 +0.05 | 5.4 -1.35 | 100.3 +0.3 | close | Xmax 5.4 mm < 6.75 mm: lower excursion-limited SPL | + |
| 18 Sound 15ND730 | 44 -1.08 | 0.29 = | 156 +9.15 | 6.5 -0.25 | 99 -1 | close | Xmax 6.5 mm < 6.75 mm: lower excursion-limited SPL | + |
| Fane FC-154F01 | 41 -4.08 | 0.287 = | 151 +4.15 | 6.5 -0.25 | 99.1 -0.9 | close | Xmax 6.5 mm < 6.75 mm: lower excursion-limited SPL | + |
| Oberton 15NMB500 | 44.74 -0.34 | 0.292 +0.01 | 127.95 -18.9 | 7.75 +1 | 100.5 +0.5 | close | + | |
| B&C 15NDL88 | 41 -4.08 | 0.28 -0.01 | 154 +7.15 | 8 +1.25 | 99 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 14 CXN 6 | 45 -0.08 | 0.28 -0.01 | 131 -15.85 | 5.6 -1.15 | 100 = | close | Xmax 5.6 mm < 6.75 mm: lower excursion-limited SPL | + |
| RCF MB 15N405 | 46 +0.92 | 0.265 -0.02 | 124 -22.85 | 6.6 -0.15 | 100 = | close | Xmax 6.6 mm < 6.75 mm: lower excursion-limited SPL | + |
| Beyma 15MCB700 | 44 -1.08 | 0.34 +0.05 | 148 +1.15 | 7 +0.25 | 99 -1 | close | + | |
| Fane COLOSSUS 15-750BMN | 45 -0.08 | 0.27 -0.02 | 127 -19.85 | 5.8 -0.95 | 99.6 -0.4 | close | Xmax 5.8 mm < 6.75 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 15B450 / 15B450A / 15B450A2 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.