Oberton 12MB35
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 51.43 Hz |
| Qts | 0.267 |
| Qes | 0.272 |
| Qms | 13.58 |
| Vas | 50.07 L |
| Sd | 514.7 cm² |
| Xmax | 6.75 mm |
| Re | 5 Ω |
| Bl | 20.5 T·m |
| Mms | 70.76 g |
| Pe | 700 W |
| Sensitivity | 98 dB |
Alignment hint
| EBP | 189 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 12NDL88 | 51 -0.43 | 0.27 = | 52 +1.93 | 8 +1.25 | 98 = | close | + | |
| Beyma 12MCB700 | 51 -0.43 | 0.27 = | 59.5 +9.43 | 7 +0.25 | 98 = | close | + | |
| B&C 12 NDL 88 | 51 -0.43 | 0.274 +0.01 | 52 +1.93 | 5.7 -1.05 | 97.8 -0.2 | close | Xmax 5.7 mm < 6.75 mm: lower excursion-limited SPL | + |
| Sica 12 K 4 PL | 48.5 -2.93 | 0.25 -0.02 | 47.4 -2.67 | 7 +0.25 | 97.1 -0.9 | close | + | |
| 18 Sound 12W750 | 55 +3.57 | 0.27 = | 58 +7.93 | 7 +0.25 | 97 -1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 12 P1000/Nd | 47 -4.43 | 0.26 -0.01 | 49 -1.07 | 8 +1.25 | 96 -2 | close | + | |
| 18 Sound 12LW800 | 52 +0.57 | 0.29 +0.02 | 48 -2.07 | 6.5 -0.25 | 96 -2 | close | 500 W vs 700 W: lower power handling · Xmax 6.5 mm < 6.75 mm: lower excursion-limited SPL | + |
| RCF LF12X401 | 45 -6.43 | 0.27 = | 50 -0.07 | 9 +2.25 | 96.5 -1.5 | close | + | |
| 18 Sound 12NTLW2500 | 52 +0.57 | 0.31 +0.04 | 52.7 +2.63 | 7.6 +0.85 | 97.5 -0.5 | close | 4 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| Beyma 12MC700Nd | 51 -0.43 | 0.24 -0.03 | 58 +7.93 | 7 +0.25 | 99 +1 | close | + |
Compare the closest 3 against the 12MB35 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.