Oberton 10NM300
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 71.36 Hz |
| Qts | 0.209 |
| Qes | 0.214 |
| Qms | 9.15 |
| Vas | 20.61 L |
| Sd | 317.3 cm² |
| Xmax | 5.25 mm |
| Re | 5.58 Ω |
| Bl | 20.12 T·m |
| Mms | 34.62 g |
| Pe | 400 W |
| Sensitivity | 100 dB |
Alignment hint
| EBP | 333 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce WAN103.01 | 70 -1.36 | 0.22 +0.01 | 22.29 +1.68 | 5 -0.25 | 99 -1 | close | Xmax 5 mm < 5.25 mm: lower excursion-limited SPL | + |
| Beyma 10MC700Nd | 63 -8.36 | 0.22 +0.01 | 20 -0.61 | 7 +1.75 | 97 -3 | close | + | |
| Oberton 10MB300 | 64.7 -6.66 | 0.244 +0.04 | 22.75 +2.14 | 5.25 = | 99 -1 | close | + | |
| Oberton 10M300 | 59.79 -11.57 | 0.248 +0.04 | 19.43 -1.18 | 5.25 = | 100 = | usable | + | |
| B&C 10NW76 | 67 -4.36 | 0.19 -0.02 | 17.8 -2.81 | 6.5 +1.25 | 97.5 -2.5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Beyma 10MC700ND v2019 | 63 -8.36 | 0.226 +0.02 | 20 -0.61 | 4.2 -1.05 | 97 -3 | usable | Xmax 4.2 mm < 5.25 mm: lower excursion-limited SPL | + |
| LaVoce WAN103.01-16 | 70 -1.36 | 0.28 +0.07 | 21.5 +0.89 | 5 -0.25 | 98 -2 | usable | 16 Ω vs 8 Ω: amp load changes · Xmax 5 mm < 5.25 mm: lower excursion-limited SPL | + |
| 18 Sound 10M600 | 70 -1.36 | 0.23 +0.02 | 25.6 +4.99 | 4 -1.25 | 102 +2 | usable | Xmax 4 mm < 5.25 mm: lower excursion-limited SPL | + |
| B&C 10FW64 | 63 -8.36 | 0.23 +0.02 | 27 +6.39 | 5 -0.25 | 98 -2 | usable | 250 W vs 400 W: lower power handling · Xmax 5 mm < 5.25 mm: lower excursion-limited SPL | + |
| B&C 10 NW 76 4 Ohms | 67 -4.36 | 0.194 -0.01 | 17.8 -2.81 | 3 -2.25 | 100.5 +0.5 | usable | 4 Ω vs 8 Ω: amp load changes · Xmax 3 mm < 5.25 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 10NM300 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.