Oberton 10MB300

10" · 8 Ω · 400 W · 99 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	64.7 Hz
Qts	0.244
Qes	0.251
Qms	9.66
Vas	22.75 L
Sd	317.3 cm²
Xmax	5.25 mm
Re	5.43 Ω
Bl	18.32 T·m
Mms	38.13 g
Pe	400 W
Sensitivity	99 dB

Alignment hint

EBP	258 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 3.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
LaVoce WAN103.01	70 +5.3	0.22 -0.02	22.29 -0.46	5 -0.25	99 =	close	Xmax 5 mm < 5.25 mm: lower excursion-limited SPL	+
Oberton 10M300	59.79 -4.91	0.248 =	19.43 -3.32	5.25 =	100 +1	close		+
Faital PRO 10FH530	60 -4.7	0.25 +0.01	23.5 +0.75	7.5 +2.25	97 -2	close		+
B&C 10FW64	63 -1.7	0.23 -0.01	27 +4.25	5 -0.25	98 -1	close	250 W vs 400 W: lower power handling · Xmax 5 mm < 5.25 mm: lower excursion-limited SPL	+
Faital PRO 10FH500	60 -4.7	0.25 +0.01	24.2 +1.45	7.25 +2	96 -3	close	4 Ω vs 8 Ω: amp load changes	+
B&C 10NW64	59 -5.7	0.26 +0.02	22 -0.75	6 +0.75	96 -3	close	300 W vs 400 W: lower power handling	+
LaVoce WAN103.01-16	70 +5.3	0.28 +0.04	21.5 -1.25	5 -0.25	98 -1	close	16 Ω vs 8 Ω: amp load changes · Xmax 5 mm < 5.25 mm: lower excursion-limited SPL	+
18 Sound 10NTLW2500	61 -3.7	0.27 +0.03	22 -0.75	7.6 +2.35	96.5 -2.5	close	4 Ω vs 8 Ω: amp load changes	+
Beyma 10MC700Nd	63 -1.7	0.22 -0.02	20 -2.75	7 +1.75	97 -2	close		+
Monacor SP-10/500FH	60 -4.7	0.258 +0.01	21.6 -1.15	4.5 -0.75	96.2 -2.8	close	Xmax 4.5 mm < 5.25 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 10MB300 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.