Oberton 10M300
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 59.79 Hz |
| Qts | 0.248 |
| Qes | 0.255 |
| Qms | 8.47 |
| Vas | 19.43 L |
| Sd | 317.3 cm² |
| Xmax | 5.25 mm |
| Re | 5.48 Ω |
| Bl | 18.22 T·m |
| Mms | 32.3 g |
| Pe | 400 W |
| Sensitivity | 100 dB |
Alignment hint
| EBP | 234 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 2.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Oberton 10MB300 | 64.7 +4.91 | 0.244 = | 22.75 +3.32 | 5.25 = | 99 -1 | close | + | |
| B&C 10NDL88 | 61 +1.21 | 0.25 = | 18.4 -1.03 | 8.1 +2.85 | 96 -4 | close | + | |
| Faital PRO 10FH530 | 60 +0.21 | 0.25 = | 23.5 +4.07 | 7.5 +2.25 | 97 -3 | close | + | |
| B&C 10NW64 | 59 -0.79 | 0.26 +0.01 | 22 +2.57 | 6 +0.75 | 96 -4 | close | 300 W vs 400 W: lower power handling | + |
| Beyma 10MC700Nd | 63 +3.21 | 0.22 -0.03 | 20 +0.57 | 7 +1.75 | 97 -3 | close | + | |
| Monacor SP-10/500FH | 60 +0.21 | 0.258 +0.01 | 21.6 +2.17 | 4.5 -0.75 | 96.2 -3.8 | close | Xmax 4.5 mm < 5.25 mm: lower excursion-limited SPL | + |
| Faital PRO 10FH500 | 60 +0.21 | 0.25 = | 24.2 +4.77 | 7.25 +2 | 96 -4 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Oberton 10NM300 | 71.36 +11.57 | 0.209 -0.04 | 20.61 +1.18 | 5.25 = | 100 = | usable | + | |
| 18 Sound 10NTLW2500 | 61 +1.21 | 0.27 +0.02 | 22 +2.57 | 7.6 +2.35 | 96.5 -3.5 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 10NW76 | 67 +7.21 | 0.26 +0.01 | 17.6 -1.83 | 6.8 +1.55 | 96.5 -3.5 | usable | + |
Compare the closest 3 against the 10M300 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.