Oberton 10M150
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 74 Hz |
| Qts | 0.43 |
| Qes | 0.45 |
| Qms | 8.89 |
| Vas | 25.9 L |
| Sd | 317.3 cm² |
| Xmax | 3.25 mm |
| Re | 5.15 Ω |
| Bl | 11.62 T·m |
| Mms | 25.54 g |
| Pe | 150 W |
| Sensitivity | 99 dB |
Alignment hint
| EBP | 164 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 15.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion FTX1025 | 71.5 -2.5 | 0.44 +0.01 | 25.9 = | 3 -0.25 | 96.2 -2.8 | close | Xmax 3 mm < 3.25 mm: lower excursion-limited SPL | + |
| LaVoce WAN102.50-16 | 76 +2 | 0.43 = | 24.11 -1.79 | 5.5 +2.25 | 97 -2 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Celestion PULSE 10 | 68 -6 | 0.439 +0.01 | 25.8 -0.1 | 3.4 +0.15 | 95.1 -3.9 | close | + | |
| Celestion BN10-300S4 | 80.7 +6.7 | 0.437 +0.01 | 21.8 -4.1 | 3.5 +0.25 | 100 +1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| RCF L 10/568H | 70 -4 | 0.384 -0.05 | 29.4 +3.5 | 3.5 +0.25 | 97.8 -1.2 | close | + | |
| Celestion BN10-300X | 64.2 -9.8 | 0.432 = | 29.2 +3.3 | 4 +0.75 | 96.9 -2.1 | close | + | |
| 18 Sound 10W400 | 70 -4 | 0.396 -0.03 | 31 +5.1 | 4.3 +1.05 | 97.8 -1.2 | close | + | |
| Eminence DELTA-10A-2 | 69.7 -4.3 | 0.44 +0.01 | 29.73 +3.83 | 6.39 +3.14 | 96.7 -2.3 | close | + | |
| Fane STUDIO 10M | 73 -1 | 0.34 -0.09 | 27.2 +1.3 | 3.1 -0.15 | 97.9 -1.1 | close | Xmax 3.1 mm < 3.25 mm: lower excursion-limited SPL | + |
| RCF MB 10G251 | 76 +2 | 0.335 -0.09 | 24 -1.9 | 3.5 +0.25 | 98.6 -0.4 | usable | + |
Compare the closest 3 against the 10M150 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.