Morel PRIMO 104
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 35 Hz |
| Qts | 0.56 |
| Qes | 0.68 |
| Qms | 3.1 |
| Vas | 38 L |
| Sd | 320 cm² |
| Xmax | 8 mm |
| Re | 3 Ω |
| Bl | 10.5 T·m |
| Mms | 70 g |
| Pe | 300 W |
| Sensitivity | 85.6 dB |
Alignment hint
| EBP | 51 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 63.9 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Boston Acoustics COMPETITOR 1000S4 | 34 -1 | 0.53 -0.03 | 35 -3 | 8.5 +0.5 | 85.7 +0.1 | close | + | |
| Morel PRIMO 10 | 35 = | 0.558 = | 38 = | 8 = | 90 +4.4 | close | + | |
| Brax MATRIX 10.1 | 35.8 +0.8 | 0.53 -0.03 | 35.34 -2.66 | 12.5 +4.5 | 86.5 +0.9 | close | + | |
| Lavoce SSF102.40 | 38 +3 | 0.57 +0.01 | 42 +4 | 8.3 +0.3 | 87.6 +2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Polk Audio DB1040 | 35 = | 0.55 -0.01 | 28.3 -9.7 | 7.5 -0.5 | 85 -0.6 | close | Xmax 7.5 mm < 8 mm: lower excursion-limited SPL | + |
| Focal 27 WX | 37.4 +2.4 | 0.555 -0.01 | 38.6 +0.6 | 7.3 -0.7 | 89.8 +4.2 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 7.3 mm < 8 mm: lower excursion-limited SPL | + |
| LaVoce SSF102.40 8 Ohm | 38 +3 | 0.571 +0.01 | 42 +4 | 7.7 -0.3 | 88.5 +2.9 | close | 8 Ω vs 4 Ω: amp load changes · Xmax 7.7 mm < 8 mm: lower excursion-limited SPL | + |
| Rockford Fosgate P1S4-10 | 30 -5 | 0.52 -0.04 | 40 +2 | 9 +1 | 84.2 -1.4 | close | + | |
| Rockford Fosgate P1S2-10 | 30 -5 | 0.52 -0.04 | 39.6 +1.6 | 9 +1 | 84 -1.6 | close | 2 Ω vs 4 Ω: amp load changes | + |
| Boston Acoustics G1104 | 29 -6 | 0.534 -0.03 | 39 +1 | 7.4 -0.6 | 87.1 +1.5 | close | 8 Ω vs 4 Ω: amp load changes · 200 W vs 300 W: lower power handling · Xmax 7.4 mm < 8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the PRIMO 104 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.