Monacor SPH-265
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 23 Hz |
| Qts | 0.275 |
| Qes | 0.32 |
| Qms | 1.95 |
| Vas | 199 L |
| Sd | 325 cm² |
| Xmax | 5.5 mm |
| Re | 6.2 Ω |
| Bl | 10 T·m |
| Mms | 35.6 g |
| Pe | 125 W |
| Sensitivity | 91.9 dB |
Alignment hint
| EBP | 72 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 35.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Aurum Cantus AC250/75C2C | 23 = | 0.275 = | 193 -6 | 8 +2.5 | 91.2 -0.7 | close | + | |
| SEAS CA26RE4X vp2 | 24.8 +1.8 | 0.273 = | 178 -21 | 7.6 +2.1 | 92.9 +1 | close | 80 W vs 125 W: lower power handling | + |
| Focal 10L 6411 | 22.4 -0.6 | 0.253 -0.02 | 210.4 +11.4 | 8 +2.5 | 93.5 +1.6 | close | + | |
| Vifa 25WP250 | 24 +1 | 0.298 +0.02 | 178 -21 | 8 +2.5 | 92.6 +0.7 | close | 70 W vs 125 W: lower power handling | + |
| SEAS CA26RE4X - H1316 | 25 +2 | 0.279 = | 164 -35 | 7.3 +1.8 | 92.5 +0.6 | close | 80 W vs 125 W: lower power handling | + |
| Eton 11-612C8/50RP | 23 = | 0.289 +0.01 | 152 -47 | 5 -0.5 | 91.7 -0.2 | close | Xmax 5 mm < 5.5 mm: lower excursion-limited SPL | + |
| Accuton S280-6-282 | 20 -3 | 0.263 -0.01 | 226 +27 | 6 +0.5 | 90.9 -1 | close | + | |
| Focal 10N 501 | 21.8 -1.2 | 0.231 -0.04 | 212.7 +13.7 | 6 +0.5 | 92.5 +0.6 | close | 60 W vs 125 W: lower power handling | + |
| Focal 10N510 | 21.8 -1.2 | 0.231 -0.04 | 212.7 +13.7 | 6 +0.5 | 92.5 +0.6 | close | 85 W vs 125 W: lower power handling | + |
| Vifa P25WO-00-08 | 24 +1 | 0.278 = | 178 -21 | 4 -1.5 | 92.6 +0.7 | close | 80 W vs 125 W: lower power handling · Xmax 4 mm < 5.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the SPH-265 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.