Monacor SPH-10M
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 29 Hz |
| Qts | 0.488 |
| Qes | 0.6 |
| Qms | 2.62 |
| Vas | 73.5 L |
| Sd | 363 cm² |
| Xmax | 6.3 mm |
| Re | 6.5 Ω |
| Bl | 12.2 T·m |
| Mms | 75.7 g |
| Pe | 120 W |
| Sensitivity | 87.6 dB |
Alignment hint
| EBP | 48 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 66.8 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Sica 10 SR 2 CP | 32.8 +3.8 | 0.49 = | 73 -0.5 | 7 +0.7 | 89.8 +2.2 | close | + | |
| Peerless SLS W 10-30/08 | 33 +4 | 0.51 +0.02 | 69.3 -4.2 | 6.5 +0.2 | 89.9 +2.3 | close | + | |
| Dayton Audio RS270-8 v2017 | 29.6 +0.6 | 0.472 -0.02 | 96.5 +23 | 6 -0.3 | 88.8 +1.2 | close | Xmax 6 mm < 6.3 mm: lower excursion-limited SPL | + |
| SICA 10 SR 2 PL | 32.6 +3.6 | 0.481 -0.01 | 82.3 +8.8 | 6.5 +0.2 | 90.6 +3 | close | + | |
| Peerless SLS10 P830668 v2012 | 32 +3 | 0.545 +0.06 | 72.9 -0.6 | 5.7 -0.6 | 89.6 +2 | close | 70 W vs 120 W: lower power handling · Xmax 5.7 mm < 6.3 mm: lower excursion-limited SPL | + |
| Artech SP25/100 | 27 -2 | 0.425 -0.06 | 86.1 +12.6 | 6.5 +0.2 | 88.2 +0.6 | close | + | |
| AE Speakers IB10AU-8 | 25 -4 | 0.485 = | 68 -5.5 | 15.3 +9 | 86.4 -1.2 | close | + | |
| AE Speakers IB10AU-4 | 25 -4 | 0.485 = | 68 -5.5 | 15.3 +9 | 89.5 +1.9 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Peerless SLS10 830668 | 33.3 +4.3 | 0.51 +0.02 | 69.3 -4.2 | 5.4 -0.9 | 90.1 +2.5 | usable | 70 W vs 120 W: lower power handling · Xmax 5.4 mm < 6.3 mm: lower excursion-limited SPL | + |
| Skytronic 902.214 | 34.3 +5.3 | 0.595 +0.11 | 70.2 -3.3 | 6.1 -0.2 | 87.7 +0.1 | usable | Xmax 6.1 mm < 6.3 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the SPH-10M →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.