Monacor SP-38A/500BS
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 37 Hz |
| Qts | 0.35 |
| Qes | 0.38 |
| Qms | 4.37 |
| Vas | 168 L |
| Sd | 855 cm² |
| Xmax | 6 mm |
| Re | 6 Ω |
| Bl | 20.4 T·m |
| Mms | 112.9 g |
| Pe | 500 W |
| Sensitivity | 96.7 dB |
Alignment hint
| EBP | 97 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 54.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Conrad CPA15-300 | 36.9 -0.1 | 0.357 +0.01 | 161.6 -6.4 | 5.7 -0.3 | 97.1 +0.4 | close | 300 W vs 500 W: lower power handling · Xmax 5.7 mm < 6 mm: lower excursion-limited SPL | + |
| Oberton 15CX | 38.2 +1.2 | 0.349 = | 163.8 -4.2 | 6.8 +0.8 | 97.8 +1.1 | close | + | |
| P.Audio S15-100LF | 38 +1 | 0.35 = | 169.1 +1.1 | 7.8 +1.8 | 98 +1.3 | close | + | |
| Fane COLOSSUS 15XB v2012 | 38 +1 | 0.322 -0.03 | 168 = | 7.5 +1.5 | 97.3 +0.6 | close | + | |
| BMS 15CN680 | 39 +2 | 0.351 = | 157.8 -10.2 | 5.5 -0.5 | 97.4 +0.7 | close | Xmax 5.5 mm < 6 mm: lower excursion-limited SPL | + |
| BMS 15CN682 | 39 +2 | 0.351 = | 157.8 -10.2 | 5.5 -0.5 | 97.4 +0.7 | close | Xmax 5.5 mm < 6 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 15XB | 38 +1 | 0.32 -0.03 | 168 = | 7.5 +1.5 | 96.2 -0.5 | close | + | |
| Faital PRO 15FH520 | 38 +1 | 0.34 -0.01 | 153.2 -14.8 | 9.15 +3.15 | 97 +0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| JBL 2265 HPL | 37 = | 0.325 -0.02 | 176 +8 | 8 +2 | 97.9 +1.2 | close | + | |
| SICA 15 S 2.5 CS | 36.3 -0.7 | 0.401 +0.05 | 168.7 +0.7 | 6.4 +0.4 | 96 -0.7 | close | 250 W vs 500 W: lower power handling | + |
Compare the closest 3 against the SP-38A/500BS →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.