Monacor SP-254TC
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.505 |
| Qes | 0.55 |
| Qms | 6.17 |
| Vas | 109 L |
| Sd | 353 cm² |
| Xmax | 5 mm |
| Re | 6.7 Ω |
| Bl | 10.2 T·m |
| Mms | 45.1 g |
| Pe | 75 W |
| Sensitivity | 90 dB |
Alignment hint
| EBP | 55 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 113.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10BR60 V2 | 31 +1 | 0.471 -0.03 | 108.2 -0.8 | 6.5 +1.5 | 90.6 +0.6 | close | + | |
| Cube F10 NEO | 30 = | 0.505 = | 127 +18 | 5.1 +0.1 | 91.8 +1.8 | close | 30 W vs 75 W: lower power handling | + |
| Audax SON28A vp | 30 = | 0.505 = | 114.2 +5.2 | 4 -1 | 89.1 -0.9 | close | 30 W vs 75 W: lower power handling · Xmax 4 mm < 5 mm: lower excursion-limited SPL | + |
| Dayton Audio DC250-8 | 28.9 -1.1 | 0.445 -0.06 | 111.4 +2.4 | 4.5 -0.5 | 90.1 +0.1 | close | Xmax 4.5 mm < 5 mm: lower excursion-limited SPL | + |
| Dayton Audio RS270-8 v2017 | 29.6 -0.4 | 0.472 -0.03 | 96.5 -12.5 | 6 +1 | 88.8 -1.2 | close | + | |
| Cube F10 SELECT | 30 = | 0.567 +0.06 | 121 +12 | 4.6 -0.4 | 90.2 +0.2 | close | 25 W vs 75 W: lower power handling · Xmax 4.6 mm < 5 mm: lower excursion-limited SPL | + |
| Beyma 10BR60 V2 vp JF rouge | 30.7 +0.7 | 0.435 -0.07 | 113.7 +4.7 | 6.5 +1.5 | 90.2 +0.2 | close | + | |
| Beyma 10BR60 V2 vp JF bleu | 32 +2 | 0.459 -0.05 | 99.9 -9.1 | 6.5 +1.5 | 90 = | close | + | |
| SEAS 25F-WBX | 32 +2 | 0.597 +0.09 | 114.5 +5.5 | 6 +1 | 89.9 -0.1 | close | + | |
| Dayton Audio DA270-8 10 | 27.8 -2.2 | 0.429 -0.08 | 108.5 -0.5 | 6.1 +1.1 | 89.3 -0.7 | close | + |
Compare the closest 3 against the SP-254TC →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.