Monacor SP-18/600FH
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.327 |
| Qes | 0.34 |
| Qms | 8.68 |
| Vas | 404 L |
| Sd | 1166 cm² |
| Xmax | 9.3 mm |
| Re | 5.1 Ω |
| Bl | 19.4 T·m |
| Mms | 132.8 g |
| Pe | 600 W |
| Sensitivity | 99 dB |
Alignment hint
| EBP | 88 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 109.9 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 18FH500 | 30 = | 0.35 +0.02 | 417.9 +13.9 | 9.25 -0.05 | 99 = | close | Xmax 9.25 mm < 9.3 mm: lower excursion-limited SPL | + |
| Faital PRO 18FH500 v2016 | 30 = | 0.35 +0.02 | 374.8 -29.2 | 9.2 -0.1 | 98.4 -0.6 | close | Xmax 9.2 mm < 9.3 mm: lower excursion-limited SPL | + |
| Faital PRO 18FH510 | 30 = | 0.29 -0.04 | 411.9 +7.9 | 9.25 -0.05 | 98 -1 | close | Xmax 9.25 mm < 9.3 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 18 LF-8 | 32 +2 | 0.329 = | 391 -13 | 8 -1.3 | 99.5 +0.5 | close | Xmax 8 mm < 9.3 mm: lower excursion-limited SPL | + |
| Eminence Kappa Pro 18LF2 | 32 +2 | 0.33 = | 391.61 -12.39 | 8 -1.3 | 98 -1 | close | Xmax 8 mm < 9.3 mm: lower excursion-limited SPL | + |
| PD PD 18BR40 | 30 = | 0.32 -0.01 | 309 -95 | 9.3 = | 98 -1 | close | + | |
| Precision Devices PD 18BR40 | 30 = | 0.32 -0.01 | 309 -95 | 9.3 = | 98 -1 | close | + | |
| RCF L 18P200N vp tlhp | 28 -2 | 0.306 -0.02 | 380 -24 | 9.8 +0.5 | 97.2 -1.8 | close | + | |
| DAS Audio S1846 vp2 | 29.6 -0.4 | 0.298 -0.03 | 384 -20 | 8 -1.3 | 97.7 -1.3 | close | Xmax 8 mm < 9.3 mm: lower excursion-limited SPL | + |
| RCF L 18P200N | 28 -2 | 0.306 -0.02 | 363 -41 | 9.8 +0.5 | 97 -2 | close | + |
Compare the closest 3 against the SP-18/600FH →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.