Monacor SP-10A/302PA
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 55 Hz |
| Qts | 0.298 |
| Qes | 0.31 |
| Qms | 7.44 |
| Vas | 40 L |
| Sd | 346 cm² |
| Xmax | 4 mm |
| Re | 6.4 Ω |
| Bl | 15.8 T·m |
| Mms | 35.1 g |
| Pe | 300 W |
| Sensitivity | 96.3 dB |
Alignment hint
| EBP | 177 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 8.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Faital PRO 10PR310 | 55 = | 0.31 +0.01 | 40.3 +0.3 | 4.92 +0.92 | 97 +0.7 | close | 4 Ω vs 8 Ω: amp load changes | + |
| B&C 10 PS 26 | 54 -1 | 0.296 = | 38 -2 | 5.5 +1.5 | 96 -0.3 | close | + | |
| SICA 10 FE 3 CP v2017 | 52 -3 | 0.307 +0.01 | 38.6 -1.4 | 4.2 +0.2 | 95.8 -0.5 | close | + | |
| B&C 10PS26 | 54 -1 | 0.29 -0.01 | 38 -2 | 5.5 +1.5 | 96 -0.3 | close | + | |
| Sica 10 N 3 PL | 51 -4 | 0.29 -0.01 | 40.5 +0.5 | 5.5 +1.5 | 96.1 -0.2 | close | + | |
| Sica 10 Fe 3 CP | 52 -3 | 0.31 +0.01 | 38.6 -1.4 | 5 +1 | 95.9 -0.4 | close | + | |
| SICA 10 L 2.5 SL 8 Ohms | 54.4 -0.6 | 0.326 +0.03 | 43.8 +3.8 | 4 = | 96.2 -0.1 | close | + | |
| SICA 10 L 2.5 SL Z006900 | 54.4 -0.6 | 0.326 +0.03 | 43.8 +3.8 | 4 = | 96.2 -0.1 | close | + | |
| SICA 10 L 2.5 SL | 54 -1 | 0.326 +0.03 | 43.8 +3.8 | 4 = | 96.2 -0.1 | close | + | |
| RCF MB 10N251 | 55 = | 0.271 -0.03 | 38.8 -1.2 | 4.6 +0.6 | 97.4 +1.1 | close | + |
Compare the closest 3 against the SP-10A/302PA →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.