Monacor SP-10A/300PA
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 55 Hz |
| Qts | 0.357 |
| Qes | 0.38 |
| Qms | 5.87 |
| Vas | 34 L |
| Sd | 346 cm² |
| Xmax | 3.8 mm |
| Re | 6.5 Ω |
| Bl | 15.6 T·m |
| Mms | 41.3 g |
| Pe | 300 W |
| Sensitivity | 94.6 dB |
Alignment hint
| EBP | 145 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 11.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| the box Speaker 10-250/8-A | 56.8 +1.8 | 0.38 +0.02 | 33.3 -0.7 | 4 +0.2 | 95.2 +0.6 | close | + | |
| B&C 10 CL 51 v2024 | 58 +3 | 0.375 +0.02 | 36 +2 | 3.9 +0.1 | 96.1 +1.5 | close | 150 W vs 300 W: lower power handling | + |
| Faital PRO 10PR330 | 60 +5 | 0.36 = | 32.9 -1.1 | 7.27 +3.47 | 95 +0.4 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Fane 10-275 | 55 = | 0.356 = | 26.1 -7.9 | 4.1 +0.3 | 94.1 -0.5 | close | + | |
| SICA 10 E 2 CS | 56 +1 | 0.347 -0.01 | 39.8 +5.8 | 4.1 +0.3 | 96 +1.4 | close | 150 W vs 300 W: lower power handling | + |
| Beyma 10G40 | 55 = | 0.314 -0.04 | 33 -1 | 5 +1.2 | 95.4 +0.8 | close | + | |
| SICA 10 FE 2.5 CP v2017 | 57 +2 | 0.365 +0.01 | 39.7 +5.7 | 4 +0.2 | 96.3 +1.7 | close | + | |
| 18 Sound 10NW750 | 52 -3 | 0.36 = | 38 +4 | 7.1 +3.3 | 94 -0.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Sica 10 Fe 2.5 CP | 57 +2 | 0.37 +0.01 | 39.7 +5.7 | 4 +0.2 | 96.3 +1.7 | close | + | |
| SICA SL10B25P | 57 +2 | 0.348 -0.01 | 41.9 +7.9 | 4 +0.2 | 95.7 +1.1 | close | + |
Compare the closest 3 against the SP-10A/300PA →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.