Monacor SP-10/700HP

10" · 8 Ω · 700 W · 95.5 dB

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	60 Hz
Qts	0.212
Qes	0.22
Qms	6.01
Vas	15.7 L
Sd	339 cm²
Xmax	3.9 mm
Re	5.5 Ω
Bl	26.1 T·m
Mms	72.4 g
Pe	700 W
Sensitivity	95.5 dB

Alignment hint

EBP	273 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 1.6 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Faital PRO 10HP1020	60 =	0.24 +0.03	16.1 +0.4	9 +5.1	96 +0.5	close		+
Beyma 10MC700ND v2019	63 +3	0.226 +0.01	20 +4.3	4.2 +0.3	97 +1.5	close		+
Beyma 10MC700Nd	63 +3	0.22 +0.01	20 +4.3	7 +3.1	97 +1.5	usable		+
B&C 10NDL88	61 +1	0.25 +0.04	18.4 +2.7	8.1 +4.2	96 +0.5	usable		+
B&C 10NW76	67 +7	0.19 -0.02	17.8 +2.1	6.5 +2.6	97.5 +2	usable	4 Ω vs 8 Ω: amp load changes · 400 W vs 700 W: lower power handling	+
Monacor SP-10/500FH	60 =	0.258 +0.05	21.6 +5.9	4.5 +0.6	96.2 +0.7	usable	500 W vs 700 W: lower power handling	+
B&C 10NW76	67 +7	0.26 +0.05	17.6 +1.9	6.8 +2.9	96.5 +1	usable	400 W vs 700 W: lower power handling	+
B&C 10 NW 76 8 Ohms	67 +7	0.261 +0.05	17.6 +1.9	3.4 -0.5	96.5 +1	usable	400 W vs 700 W: lower power handling · Xmax 3.4 mm < 3.9 mm: lower excursion-limited SPL	+
JBL 2251J	61 +1	0.2 -0.01	28.6 +12.9	4.1 +0.2	94.9 -0.6	usable	16 Ω vs 8 Ω: amp load changes · 400 W vs 700 W: lower power handling	+
Oberton 10M300	59.79 -0.21	0.248 +0.04	19.43 +3.73	5.25 +1.35	100 +4.5	usable	400 W vs 700 W: lower power handling	+

Compare the closest 3 against the SP-10/700HP →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.