Monacor SP-10/500FH
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 60 Hz |
| Qts | 0.258 |
| Qes | 0.28 |
| Qms | 3.28 |
| Vas | 21.6 L |
| Sd | 319 cm² |
| Xmax | 4.5 mm |
| Re | 5.1 Ω |
| Bl | 17.9 T·m |
| Mms | 46.5 g |
| Pe | 500 W |
| Sensitivity | 96.2 dB |
Alignment hint
| EBP | 214 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 3.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10NW64 | 59 -1 | 0.26 = | 22 +0.4 | 6 +1.5 | 96 -0.2 | close | 300 W vs 500 W: lower power handling | + |
| 18 Sound 10NTLW2500 | 61 +1 | 0.27 +0.01 | 22 +0.4 | 7.6 +3.1 | 96.5 +0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FH500 | 60 = | 0.25 -0.01 | 24.2 +2.6 | 7.25 +2.75 | 96 -0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FH530 | 60 = | 0.25 -0.01 | 23.5 +1.9 | 7.5 +3 | 97 +0.8 | close | + | |
| Faital PRO 10FH500 | 60 = | 0.26 = | 25.8 +4.2 | 7.5 +3 | 96 -0.2 | close | + | |
| B&C 10NDL88 | 61 +1 | 0.25 -0.01 | 18.4 -3.2 | 8.1 +3.6 | 96 -0.2 | close | + | |
| Faital PRO 10FH520 | 60 = | 0.29 +0.03 | 23.5 +1.9 | 7.25 +2.75 | 97 +0.8 | close | + | |
| B&C 10CL64 | 63 +3 | 0.31 +0.05 | 22.2 +0.6 | 5.2 +0.7 | 96 -0.2 | close | 250 W vs 500 W: lower power handling | + |
| Oberton 10M300 | 59.79 -0.21 | 0.248 -0.01 | 19.43 -2.17 | 5.25 +0.75 | 100 +3.8 | close | + | |
| Oberton 10MB300 | 64.7 +4.7 | 0.244 -0.01 | 22.75 +1.15 | 5.25 +0.75 | 99 +2.8 | close | + |
Compare the closest 3 against the SP-10/500FH →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.