Monacor SP-10/250PRO
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 47 Hz |
| Qts | 0.331 |
| Qes | 0.35 |
| Qms | 6.16 |
| Vas | 40.7 L |
| Sd | 380 cm² |
| Xmax | 4.8 mm |
| Re | 7.1 Ω |
| Bl | 18.5 T·m |
| Mms | 57 g |
| Pe | 250 W |
| Sensitivity | 93.3 dB |
Alignment hint
| EBP | 134 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 11.4 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10MW/ND | 49 +2 | 0.32 -0.01 | 40.7 = | 7.5 +2.7 | 93.5 +0.2 | close | 6 Ω vs 8 Ω: amp load changes | + |
| Fane SOVEREIGN PRO 10-300SC | 47 = | 0.329 = | 45.4 +4.7 | 4.8 = | 95 +1.7 | close | + | |
| Ciare FXE 10-2.5 | 46 -1 | 0.358 +0.03 | 41.6 +0.9 | 6 +1.2 | 93.6 +0.3 | close | + | |
| Beyma 10MW/ND v2 | 49 +2 | 0.319 -0.01 | 40.7 = | 6.1 +1.3 | 94.8 +1.5 | close | + | |
| SICA 10 S 3 CP v2017 | 43 -4 | 0.313 -0.02 | 39.9 -0.8 | 7 +2.2 | 93.6 +0.3 | close | + | |
| SICA 10 S 3 CP 8 Ohms | 48 +1 | 0.323 -0.01 | 32.4 -8.3 | 6.1 +1.3 | 94 +0.7 | close | + | |
| Beyma 10"WR300 | 52 +5 | 0.35 +0.02 | 42 +1.3 | 6 +1.2 | 95 +1.7 | close | + | |
| Oberton 10B200 | 48.06 +1.06 | 0.349 +0.02 | 31.94 -8.76 | 5.75 +0.95 | 93 -0.3 | close | + | |
| 18 Sound 10NW750 | 52 +5 | 0.36 +0.03 | 38 -2.7 | 7.1 +2.3 | 94 +0.7 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Sica 10 Fe 3 CP | 52 +5 | 0.31 -0.02 | 38.6 -2.1 | 5 +0.2 | 95.9 +2.6 | close | + |
Compare the closest 3 against the SP-10/250PRO →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.