Monacor RAPTOR 12 v2014
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 43 Hz |
| Qts | 0.545 |
| Qes | 0.58 |
| Qms | 9.04 |
| Vas | 22.5 L |
| Sd | 470 cm² |
| Xmax | 7.7 mm |
| Re | 3.3 Ω |
| Bl | 17 T·m |
| Mms | 188.5 g |
| Pe | 1000 W |
| Sensitivity | 90.7 dB |
Alignment hint
| EBP | 74 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 32.9 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Monacor RAPTOR 12 v2014 2 | 43 = | 0.548 = | 17.8 -4.7 | 6.8 -0.9 | 91.6 +0.9 | close | Xmax 6.8 mm < 7.7 mm: lower excursion-limited SPL | + |
| Monacor RAPTOR 12 | 43 = | 0.624 +0.08 | 27.5 +5 | 8.5 +0.8 | 90.7 = | close | + | |
| DD Audio 712D4 | 37.7 -5.3 | 0.478 -0.07 | 20.2 -2.3 | 7 -0.7 | 91.2 +0.5 | usable | Xmax 7 mm < 7.7 mm: lower excursion-limited SPL | + |
| Faital PRO 12RS1066 | 45 +2 | 0.44 -0.11 | 28.4 +5.9 | 12.45 +4.75 | 92 +1.3 | usable | 16 Ω vs 4 Ω: amp load changes | + |
| DC Audio LV4 D2 | 35.9 -7.1 | 0.5 -0.05 | 30.6 +8.1 | 11 +3.3 | 92.2 +1.5 | usable | + | |
| MTX Audio TX812 | 35 -8 | 0.422 -0.12 | 24.6 +2.1 | 10 +2.3 | 91.6 +0.9 | usable | + | |
| Monacor RAPTOR 12 MK2 | 34 -9 | 0.523 -0.02 | 32 +9.5 | 10.1 +2.4 | 89.2 -1.5 | usable | + | |
| Faital PRO 12XL1200 | 50 +7 | 0.42 -0.13 | 25 +2.5 | 12.45 +4.75 | 93 +2.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 12BG76 | 44 +1 | 0.41 -0.14 | 32 +9.5 | 9.5 +1.8 | 92 +1.3 | usable | 8 Ω vs 4 Ω: amp load changes · 500 W vs 1000 W: lower power handling | + |
| JL Audio 12TW1-2 | 35 -8 | 0.577 +0.03 | 28.54 +6.04 | 10 +2.3 | 85.07 -5.63 | usable | 2 Ω vs 4 Ω: amp load changes · 300 W vs 1000 W: lower power handling | + |
Compare the closest 3 against the RAPTOR 12 v2014 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.